PUBLICATIONS/ SYMPOSIA VOLUMES EDITED

1. “Fire, Combustion and Hazardous Waste Processing”, Edited by: Acharya, S., Annamalai, K., Presser, C., and Skocypec, R. D., ASME-HTD Vol. 296, 190 pages, New York, 1994.
2. “Advances in Computational Heat Transfer”, Edited by G. Vradis, N. K. Anand, G. Facas, S. Acharya, T. Chopin, R. Hogan, ASME-HTD, New York, 1995
3. “Turbulent Heat Transfer” HTD-Vol.346, ASME Proceedings of the 1997 32nd National Heat Transfer Conference, Volume 8, edited by P.H.Oosthuizen, T.S.Chen, S.Acharya, B.F.Armaly, and D.W. Pepper
4. “Dispersed Flows in Combustion, Incineration and Propulsion Systems”, ASME HTD-Vol. 352, Proceedings of the 1997 ASME-IMECE, K. Annamalai, S. Acharya, and 7 others.
5. “Heat Transfer in Flowing Systems-Vol. 1”, ASME-HTD-Vol. 361-1, Proceedings of the ASME-IMECE, 1998, several editors including S. Acharya
6. “Numerical and Experimental Methods in Heat Transfer-Vol. 5”, ASME-HTD-Vol. 361-5, Proceedings of the ASME-IMECE, 1998, several editors including S. Acharya
7. “Dispersed Flows in Combustion, Incineration and Propulsion Systems”, ASEM-FED-Vol. 250, Proceedings of ASME-IMECE Fluids Engineering Division, Book No. H01212, several editors including S. Acharya

Book Chapters (#8 in print or in press; 1 in draft form)

1. Acharya, S., Hoda, A., Tyagi, M., “Flow and Heat Transfer Predictions of Film Cooling”, in Heat Transfer in Gas Turbine Systems, Annals of the New York Academy of Sciences, Vol. 934, 2001, pp. 110-125 (Editors: R. J. Goldstein and T. Simon)-invited
2. Acharya, S., and Zhou, F., “Flow and Heat Transfer in Dimpled Two-Pass Channel”, in Heat Transfer in Gas Turbine Systems, Annals of the New York Academy of Sciences, Vol. 934, 2001, pp. 424-431(Editors: R. J. Goldstein and T. Simon)-contributed
3. Acharya, S, Gutmark, E., Stephens, J., and Li, J., Open-Loop Control of Swirl-Stabilized Spray Combustion, in Advances in Chemical Propulsion, 2002 (Editor: Gabriel Roy, CRC Press), Chapter 20, pp. 323-339-invited
4. Jones, R., Acharya, S., and Harvey, A., Improved Turbulence Modeling of Film Cooling Flow and Heat Transfer over Turbine Blades, Chapter 4, pp. 113-146, in Modeling and Simulation of Turbulent Heat Transfer, WIT Press, 2005 (Editors: B. Sunden and M. Faghri)-invited, ISBN: 1-85312-956-9
5. Acharya, S., Uhm, J., Characteristics and Control of Combustion Instabilities in a Swirl-Stabilized Spray Combustor, in Advances in Chemical Propulsion, 2004 (Editor: Gabriel Roy), to appear, invited
6. Uhm, J., and Acharya, S., Combustion Oscillations in a Swirl-Stabilized Combustor and its Active Control, in Combustion and Noise Control, 2003, pp. 243-247, Cranfield University Press (Editor: Gabriel Roy), invited
   
7. Acharya, S., Active Control of Combustion Instability, in “Control of Combustion Processes”, 2005, (Editor: Gabriel Roy) to appear, invited
8. Acharya, S., 3-dimensional Aerodynamics of Turbine Blades, in Gas Turbine Handbook, Edited by Richard Dennis, NETL, in progress

Articles in Refereed Journals (#129 in print, in press or in review)

Published/In Press/In Revisions (#133 published/in-press, #2 revised versions pending final exceptance and #3 in review)

1. Acharya, S., and Patankar, S.V., "Laminar Mixed Convection in a Shrouded Fin Array", ASME Journal of Heat Transfer, Vol. 103, No. 3, 1981, pp. 559-565.
   
2. Sparrow, E.M., and Acharya, S., "A Natural Convection Fin with a Solution-Determined Nonmonotonically Varying Heat Transfer Coefficient", ASME Journal of Heat Transfer, Vol. 103, No. 2, 1981, pp. 218-225.
   
3. Patankar, S.V., and Acharya, S., "Development of Simple Model to Predict Turbulent Flow Behavior in a Streamwise Corner", Transactions of the Canadian Society of Mechanical Engineers, Vol. 8, No. 3, 1984, pp. 146-149.
   
4. Acharya, S., and Goldstein, R.J., "Natural Convection in an Externally Heated Inclined Enclosure Containing Internal Energy Sources", ASME Journal of Heat Transfer, Vol. 107, No. 4, 1985, pp. 855-866.
   
5. Acharya, S., and Patankar, S.V., "Use of an Adaptive Grid Procedure for Parabolic Flow Problems", International Journal of Heat and Mass Transfer, Vol. 28, No. 6, 1985, pp. 1057-1066.
   
6. Acharya, S., "Natural Convection in an Inclined Square Box Containing Heat Sources and Cooled from Below", International Journal of Heat and Fluid Flow, Vol. 6, No. 2, 1985, pp. 113-121.
   
7. Acharya, S., and Tsang, C.H., "Natural Convection in Fully Partitioned Inclined Enclosures", Numerical Heat Transfer, Vol. 8, 1985, pp. 407-428.
   
8. Burch, T., Rhodes, T., and Acharya, S., "Laminar Free Convection Between Finitely Conducting Vertical Plates", International Journal of Heat and Mass Transfer, Vol. 28, No. 6, 1985, pp. 1173-1186.
   
9. Tsang, C.H., and Acharya, S., "Natural Convection in an Inclined Enclosure with an Off-Center Complete Partition", Numerical Heat Transfer, Vol. 9, No. 2, 1986, pp. 217-239.
   
10. Habchi, S., and Acharya, S., "Laminar Mixed Convection in a Symmetrically or Asymmetrically Heated Vertical Channel", Numerical Heat Transfer, Vol. 9, No. 5, 1986, pp. 605-618.
    
11. Acharya, S., Braud, K., and Attar, A., "Calculation of Fin Efficiency for Condensing Fins", International Journal of Heat and Fluid Flow, Vol. 7, 1986, pp. 96-98.
    
12. Jang, D.S., Jetli, R., and Acharya, S., "Comparison of the PISO, SIMPLER and SIMPLEC Algorithms for the Treatment of the Pressure-Velocity Coupling in Steady Flow Problems", Numerical Heat Transfer, Vol. 10, No. 3, 1986, pp. 209-228.
    
13. Jetli, R., Acharya, S., and Zimmerman, E., "The Influence of Baffle Location on Natural Convection in a Partially Divided Enclosure", Numerical Heat Transfer, Vol. 10, No. 5, 1986, pp. 521-536.
    
14. Habchi, S., and Acharya, S., "Laminar Mixed Convection in a Partially Blocked Vertical Channel", International Journal of Heat and Mass Transfer, Vol. 29, No. 11, 1986, pp. 1711-1722.
    
15. Acharya, S., and Tsang, C.H., "Influence of Wall Conduction on Natural Convection in an Inclined Square Enclosure", Warme-und Stoffubertragung, Vol. 21, 1987, pp. 19-30.
    
16. Zimmerman, E., and Acharya, S., "Free Convection Heat Transfer in a Partially Divided Vertical Enclosure with Conducting End Walls", International Journal of Heat and Mass Transfer, Vol. 30, No. 2, 1987, pp. 319-331.
    
17. Acharya, S., Adair, D., and Whitelaw, J., "Flow Over a Trailing Flap and in its Asymmetric Wake", AIAA Journal, Vol. 25, No. 7, 1987, pp. 897-904.
    
18. Jang, D.S., and Acharya, S., "Calculation of Particle Dispersion Due to Turbulence in Isothermal or Reacting Elliptic Flows", AIChE Journal, Vol. 34, No. 3, 1988, pp. 514-518.
    
19. Zimmerman, E., and Acharya, S., "The Influence of Aperture Location on the Free Convection Heat Transfer in a Partially Divided Enclosure", AIAA Journal of Thermophysics and Heat Transfer, Vol. 2, No. 2, 1988, pp. 184-186.
    
20. Jang, D.S., and Acharya, S., "Source Term Decomposition to Improve Convergence of Swirling Flow Calculations", AIAA Journal, Vol. 26, No. 3, 1988, pp. 372-374.
    
21. Acharya, S., and Jang, D.S., "Buoyancy Induced Convection Heat Transfer in a Staggered Vertical Channel", Numerical Heat Transfer, Vol. 13, No. 4, 1988, pp. 515-526.
    
22. Jetli, R., and Acharya, S., "End Wall Effects on Thermal Stratification and Heat Transfer in a Vertical Enclosure with Offset Partitions", The Canadian Journal of Chemical Engineering, Vol. 66, No. 4, 1988, pp. 563-571.
    
23. Moukalled, F., and Acharya, S., "Forced Convection Heat Transfer in a Finitely Conducting Externally Finned Pipe", ASME Journal of Heat Transfer, Vol. 110, No. 3, 1988, pp. 571-576.
    
24. Zimmerman, E., and Acharya, S., "Natural Convection in an Enclosure with a Vertical Baffle", Communications in Applied Numerical Methods, Vol. 4, No. 5, 1988, pp. 631-638.
    
25. Jang, D.S., and Acharya, S., "Improved Modeling of Pulverized Coal Combustion in a Furnace",  ASME Journal of Energy Resources Technology, Vol. 110, No. 2, 1988, pp. 124-132.
    
26. Jetli, R., and Acharya, S., "Buoyancy Induced Heat Transfer in a Vertical Enclosure with Offset Partial Vertical Dividers", Applied Mathematical Modelling, Vol. 12, 1988, pp. 411-422.
    
27. Cundy, V.A., Lester, T.W., Sterling, A.M., Morse, J.S., Montestruc, A.N., Leger, C., Acharya, S., and Pershing, D.W., "Rotary Kiln Incineration I.  An Indepth Study - Liquid Injection", Journal of the Air Pollution Control Association, Vol. 39, No. 1, 1989, pp. 63-75.
    
28. Acharya, S., and Moukalled, F.H., "Improvements to Imcompressible Flow Calculation on a Non-staggered Curvilinear Grid", Numerical Heat Transfer, Vol. 15, No. 2, 1989, pp. 131-151.
    
29. Yucel, A., Acharya, S., and Williams, M.L., "Combined Natural Convection and Radiation in a Rectangular Enclosure", Numerical Heat Transfer, Vol. 15, No. 2, 1989, pp. 261-278.
    
30. Cundy, V.A., Lester, T.W., Montestruc, A.N., Morse, J.S., Leger, C., Acharya, S. and Sterling, A.M., "Rotary Kiln Incineration III.  An Indepth Study - CCl4 Destruction in a Full-Scale Rotary Kiln Incinerator", Journal of the Air Pollution Control Association, Vol. 39, No. 7, 1989, pp. 944-952.
    
31. Cundy, V.A., Lester, T.W., Montestruc, A.N., Morse, J.S., Leger, C., Acharya, S., and Sterling, A.M., "Rotary Kiln Incineration IV.  An Indepth Study - Kiln Exit, Transition, and Afterburner Sampling During Liquid CCl4 Processing", Journal of the Air Pollution Control Association, Vol. 39, No. 8, 1989, pp. 1073-1085.
    
32. Cundy, V.A. Lester, T.W., Leger, C., Miller, G., Montestruc, A.N., Acharya, S., Sterling, A.M., Pershing, D.W., Lighty, J.S., Silcox, G.D., and Owens, W.D., "Rotary Kiln Incineration - Combustion Chamber Dynamics", Journal of Hazardous Materials,  Vol. 22, No. 2, 1989, pp. 195-219.
    
33. Acharya, S., and Jetli, R., "Heat Transfer and Buoyancy Induced Flow in an Externally Heated Partially Divided Square Box", International Journal of Heat and Mass Transfer, Vol. 33, No. 5, 1990, pp. 931-942.
    
34. Acharya, S., and Moukalled, F.H., "An Adaptive Grid Solution Procedure for Convection-Diffusion Problems", Journal of Computational Physics, Vol. 91, No. 1, 1990, pp. 32-54.
    
35. Lester, T.W., Cundy, V.A., Sterling, A.M., Leger, C., Montestruc, A.N., and Acharya, S., "Dynamics of Rotary Kiln Incineration of Toluene Packs", Combustion Science and Technology, Vol. 74, No. 1-6, 1990, pp. 67-82.
    
36. Jang, D. S., and Acharya, S., “A Numerical Simulation of CCl4 Destruction in a Two-Dimensional Kiln”, Energy R & D Journal, Vol. 12, No. 3, pp. 94-111, 199.
    
37. Yucel, A., and Acharya, S., "Natural Convection of a Radiating Fluid in a Partially Divided Square Enclosure", Numerical Heat Transfer, Vol. 19, No. 4, 1991, pp. 471-485.
    
38. Harvey, A.D., Acharya, S., Lawrence, S.L. and Chang, S., "A Solution Adaptive Grid Procedure For An Upwinded Parabolized Flow Solver", AIAA Journal,  Vol. 29, No. 8, 1991, pp. 1232-1240.
    
39. Moukalled, F., and Acharya, S., "A Local Adaptive Grid Procedure For Incompressible Flow With Multigridding and Equidistribution Concepts", International Journal for Numerical Methods in Fluids,  Vol. 13, 1991, pp.1085-1111.
    
40. Jang, D.S., and Acharya, S., "Moment Closure Model for Nitrogen Oxide Formation in Pulverized Coal Furnaces", ASME Journal of Energy Resources and Technology,  Vol. 113, No. 2, 1991, pp. 117-121.
    
41. Acharya, S., Myrum, T. and Inamdar, S., "The Effect of Subharmonic Flow Pulsation in a Ribbed Pipe: Flow Visualization and Pressure Measurements", AIAA Journal,  Vol. 29, No. 9, 1991, pp. 1390-1400.
    
42. Moukalled, F., Kasamani, J. and Acharya, S., "Numerical Solution of Turbulent Convection Heat Transfer in Externally Finned Pipes, Numerical Heat Transfer, Part B,  Vol. 21, 1992, pp.401-422.
    
43. Myrum, T., Acharya, S., Mehrotra, A., and Inamdar, S., "Vortex-Generator  Induced Heat Transfer Augmentation Past a Rib", ASME Journal of Heat Transfer,  Vol. 114, No.1, 1992, pp. 280-284.
    
44. Harvey, A.D., Acharya, S., and Lawrence, S.L., "A Solution-Adaptive Grid Procedure for the Three-dimensional Parabolized Navier-Stokes Equations", AIAA Journal, Vol. 30, No. 4, 1992, pp. 953-962
    
45. Moukalled, F., and Acharya, S., "Application of an Adaptive Grid Procedure for the Calculation of Turbulent Separated Flows", Computers and Fluids, Vol. 21, No. 3, 1992, pp. 445-473.
46. Ohm, T., Jang, D. S., Chae, C., and Acharya, S., “A Study for the Advanced Design of Rotary Kiln Incinerator (I): Numerical Simulation of 3-D Turbulent Flow Field”, Journal of the Korea Solid Wastes Engineering Society, Vol. 9, No. 2, pp. 135-148, 1992
    
47.  Acharya, S., and Mehrotra, A., "Natural Convection Heat Transfer in Smooth and Ribbed Vertical Channels", International Journal of Heat and Mass Transfer,   Vol. 36, No. 1, 1993, pp. 236-241.
    
48. Dutta, S., and Acharya, S., "Heat Transfer and Flow Past a Backstep with a Nonlinear k- Model and the Modified k- Model",  Numerical Heat Transfer, Part A,  Vol. 23, No. 3, 1993, pp. 281-302.
    
49. Moukalled, F., Diab, H., and Acharya, S., "Numerical Simulation of Laminar Natural Convection in Concentric Ducts of Rhombic Cross-Sections",  Numerical Heat Transfer, Part A, Vol. 24, No. 1, 1993, pp. 101-119.
50. Rhodes, T., and Acharya, S., "An Adaptive Differencing Scheme for Flow and Heat Transfer Problems", Numerical Heat Transfer, Part B,  Vol. 23, No. 2, 1993, pp. 153-174.
51. Acharya, S., Dutta, S., Myrum, T., and Baker, R. S., "Periodically Developed Flow and Heat Transfer in a Ribbed Duct", International Journal of Heat Mass Transfer,  Vol. 36, No. 8, 1993, pp. 2069-2082.
    
52. Myrum, T. A., Qiu, X., and Acharya, S., " Heat Transfer Enhancement in a Ribbed Duct Using Vortex Generators", International Journal of Heat Mass Transfer,  Vol. 36, No. 14, 1993, pp. 3497-3508.
    
53. Harvey, A., Acharya, S., and Lawrence, S., "Space-Marching Calculations about Hypersonic Configurations Using a Solution-Adaptive Mesh Algorithms", AIAA Journal, Vol. 31, No. 10, 1993, pp. 1809-1818.
    
54. Acharya, S., Dutta, S., Myrum, T., and Baker, R. S., " Turbulent Flow Past A Surface-Mounted Two-Dimensional Rib", ASME Journal of Fluids Engineering,  Vol. 116, No. 2, 1994, pp. 238-246.
    
55. Moukalled, F., and Acharya, S., "Laminar Natural Convection in Eccentric Ducts of Rhombic Cross-Sections", Numerical Heat Transfer, Vol. 26, No. 4, 1994, pp. 380-398.
    
56. Acharya, S., " Solution Adaptive Techniques in Computational Heat Transfer and Fluid Flow", Computational Mechanics, Vol. 14, No. 5, 1994, pp. 447-467.
    
57. Yucel, A., Acharya, S., and Williams, M., "Natural Convection of a Radiating Fluid in a Square Enclosure", Sadhna: Special Journal Issue Computational Heat Transfer, Vol. 19, Part 5, 1994, pp. 751-764.
    
58. Moukalled, F., Darwish, M., and Acharya, S., "Influence of Longitudinal Pipe Conduction on  Mixed Convection Heat Transfer in Externally Finned Pipes", Numerical Heat Transfer,  Vol. 28, No.2, 1995, pp. 1-17.
    
59. Moukalled, F., Darwish, M., and Acharya, S., "Laminar Mixed Convection Heat Transfer in Externally Finned Pipes", Journal of Enhanced Heat Transfer, Vol. 3, No. 3, 1995, pp.1-15
    
60. Moukalled, F., and Acharya, S., "Natural Convection in the Annulus Between a Horizontal Circular Cylinder Placed Concentrically inside a Square Cylinder",  AIAA Journal of Thermophysics and Heat Transfer, Vol. 10, No. 3, 1996, pp. 524-531
    
61. Myrum, T., Acharya, S., Sinha, S., and Qiu, X., "The Effect of placing Vortex generators Above Ribs in Ribbed Ducts on the Flow, Temperature and Heat Transfer Behavior", ASME Journal of Heat Transfer, Vol. 118, No. 2, 1996, pp. 294-300.
    
62. Acharya, S., Myrum, T., Sinha, S., and Qiu, X., "Developing and Periodically Developed  Flow, Temperature and Heat Transfer in a Ribbed Duct", Intl. Journal of Heat  and Mass Transfer, 1997, Vol. 40, No. 2, pp. 461-480
    
63. Myrum, T. A., Acharya, S., and Inamdar, S., "Laminar Pulsed Flow and Heat Transfer in a Vertical Isothermal Tube with and without Buoyancy", AIAA Journal of Thermophysics and Heat Transfer, Vol. 11, No. 3, 1997, pp. 423-428
    
64. Moukalled, F., Acharya, S., “Buoyancy Induced Heat Transfer in Partially Divided Trapezoidal Cavities” Numerical Heat Transfer, Vol. 32, No. 8, 1998, pp.787-810.
    
65. Acharya, S., Myrum, T. A., and Dutta, S., "Heat Transfer in Turbulent Flow Past a Surface-Mounted Two-Dimensional Rib", ASME Journal of Heat Transfer, Vol. 120, No. 3, 1998, pp.550-562.
    
66. Hibbs, R., Acharya, S., Chen, Y., Nikitopoulos, D., and Myrum, T., "Heat Transfer in a Two-Pass Internally Ribbed Turbine Blade Coolant Channel with Cylindrical Vortex Generators", ASME-J. Turbomachinery, Vol. 120, No. 4, pp. 724-734 July 1998.
    
67. Acharya, S., and Chopin, T., “Adaptive-Multigrid Differencing Strategies for Control Volume Based Predictive Procedures”, Numerical Heat Transfer,  Vol. 34, No. 3, pp. 279-300 August 1998
    
68. Panigrahi, P., and Acharya, S., “Mechanisms of Turbulence Transport for Flow Past a Rib in the Internal Coolant Passage of a Gas Turbine Blade” ASME J. Turbomachinery, Vol. 121, No. 1, pp. 152-159 January  1999.
    
69. Muldoon, F., and Acharya, S., “Dynamics of Large Scale Structures for Jets in CrossFlow”, ASME J. of Turbomachinery, Vol. 121, No. 3, pp. 577-587 July  1999.
    
70. Moukalled, F., Doughan, A., and Acharya, S., “Mixed Convection Heat Transfer in Concave and Convex Channels”, AIAA J. Thermophysics, Vol. 13, No. 4, 1999, pp. 508-516
    
71. Li, J., and Acharya, S., “Flame Stabilization Through Forcing”, Comb. Sci. and Tech., Vol. 152, 2000, pp. 1-22
    
72. Chen, Y., Nikitopoulos, D., Hibbs, R., Acharya, S., and Myrum, T., "Detailed Heat/Mass Transfer Distribution in a Ribbed Coolant Passage", International Journal of Heat and Mass Transfer, Vol. 43, No. 8, 2000, pp. 1479-1492.
    
73. Hoda, A., and Acharya, S., “Predictions of a Film Coolant Jet in Crossflow with Different Turbulence Models”, ASME Journal of Turbomachinery, Vol. 122, No. 3,  July  2000, pp. 558-569
    
74. Moukalled, F., Doughan, A., and Acharya, S., “Parametric Study of Mixed Convection in Channels with Concave and Convex Surfaces”, Intl. J. Heat and Mass Transfer, Vol. 43, No. 11, 2000, pp. 1947-1963.
75. Moukalled, F., and Acharya, S., “Natural Convection in Trapezoidal Cavities with Baffles Mounted to their Upper Inclined Surfaces”, Numerical Heat Transfer, Vol. 37, No. 6, 2000, pp. 545-565
76. Hibbs, R., Acharya, S., Chen, Y., and Nikitopoulos, D. E., “Mass/Heat Transfer in a Ribbed Coolant Passage with Cylindrical Vortex Generators: The Effect of Generator-Rib Spacing”, ASME J. Heat Transfer, Vol. 122, No. 4, 2000, pp. 641-652
77. Ekkad, S., Pamula, G., and Acharya, S., “Influence of Crossflow Induced Swirl and Impingement on Heat Transfer in an Internal Coolant Passage of a Turbine Airfoil”, ASME J. of Heat Transfer, Vol. 122, No. 3, 2000, pp. 587-597
78. Pamula, G., Ekkad, S., and Acharya, S., “Influence of Crossflow Induced Swirl and Impingement on Heat Transfer in an Internal Coolant passage of a Turbine Airfoli Conneced by Two Rows of Holes”, ASME J. of Turbomachinery, Vol. 123, April 2001,pp. 281-287.
79. Acharya, S., Eliades, E., and Nikitopoulos, D., “Heat Transfer Enhancements in Rotating Two-Pass Coolant Channels with Profiled Ribs: Part 1-Average Results”, ASME J. of Turbomachinery, January 2001, Vol. 123, pp. 97-106
80. Nikitopoulos, D., Eliades, V., and Acharya, S., “Heat Transfer Enhancements in Rotating Two-Pass Coolant Channels with Profiled Ribs: Part 2-Detailed Results for Two Profile Configurations”, ASME J. of Turbomachinery, January 2001, Vol. 123, pp. 107-114
81. Li, J., and Acharya, S., “Velocity Measurements in a Combustor Undergoing Limit Cycle Pressure Oscillations”, Comb. Sci. and Tech., Vol. 162, 2001, pp. 147-173
82. Moukalled, F., and Acharya, S., “Natural Convection in a Trapezoidal Enclosure with Offset Baffles”, AIAA J. of Thermophysics and Heat Transfer, Vol. 15, No. 2, 2001, pp. 212-218
83. Eliades, V., Nikitopoulos, D. E., and Acharya, S., “Detailed Mass Transfer Distribution in Rotating Two-Pass Ribbed Coolant Channels with Vortex Generators” AIAA J. of Thermophysics,  Vol. 15, No. 3, 2001, pp. 266-274
84. Jones, R., Harvey, A., and Acharya, S., “Low Reynolds Number Turbulence Modeling of Stirred Tank Flows”, ASME J. of Fluids Engineering, Vol. 123, No. 3, 2001, pp. 640-648
85. Nasir, H., Ekkad, S. V., Acharya, S., “Effect of Compound Angle injection on Flat Surface Film Cooling with Large Streamwise Injection Angle”, Experimental Thermal and Fluid Science, Vol. 25, 2001, pp. 23-29
86. Santhanam, V., Knopf, F. C., Acharya, S., and Gutmark, E., “PLIF and Temperature Measurements in an Actively Forced Swirl-Stabilized Spray Combustor”, AIAA J. of Propulsion and Power, Vol. 18, No. 4, July, 2002, pp. 855-865
87. Ekkad, S., Kontrovitz, D., Nasir, H., Pamula, G., Acharya, S., “Effect of Rib Turbulators in the First Pass on Heat Transfer Distributions in a Two-Pass Channel Connected by Two Rows of Holes”, AIAA J. of Thermophysics and Heat Transfer, Vol. 16, pp. 404-414, July 2002
88. Chandra, P. R., Lau, C. L., and Acharya, S., “Effect of Multimodal Forcing on Thermal Transport in a Coaxial Combustor Geometry”, Experimental Thermal and Fluid Science, Vol. 27, No. 3, 2003, pp 215-225
89. Acharya, S., Murugappan, S., O’Donnell, M., and Gutmark, E. J., “Velocity and Emission Characteristics and Control of Combustion Instabilities in a Swirl-Stabilized Spray Combustor”, AIAA J. of Propulsion and Power, Vol. 19, No.3, 2003, pp. 212-220
90. Panigrahi, P., and Acharya, S., “An Improved Method for Calculating the Turbulent Phase Decorrelation”, Experiments in Fluids, Vol. 35, No. 3, 2003,  pp. 237-239
91. Campos-Delgado, Allgood, D., Zhou, K., and Acharya, S., “Active Control of Combustion Instabilities Using Model-Based Controllers”, Comb. Science and Technology, Vol. 175, No. 1, 2003, pp. 27-53
92. Murugappan, S., Acharya, S., Park, S., Annaswamy, A., Ghoneim, A., Acharya, S., and Allgood, D., “Optimal Control of Swirl-Stabilized Spray Combustion with System-Identification Approaches”, Comb. Science and Technology, Vol. 175, No. 1, 2003, pp. 55-81
93. Allgood, D., Murugappan, S., Acharya, S., and Gutmark, E., “Infra-Red Temperature Measurements in an Actively Controlled Spray Combustor, Comb. Science and Technology , Vol. 175, 2003, pp. 333-355
94. Panigrahi, P., and Acharya, S., “Analysis of Large Scale Structures in Separated Shear Layers”, Experimental Thermal and Fluid Science, Vol. 27, No. 6, 2003, pp. 817-828
95. Saha, A. K., and Acharya, S., “Parametric Study of Unsteady Flow and Heat Transfer in a Pin-Fin Heat Exchanger”, Int. J. Heat Mass Transfer,  Vol. 46, 2003, pp. 3815-3830
96. Agarwal, P., Acharya, S., and Nikitopoulos, D. E., Heat Transfer in 1:4 Rectangular Passages with Rotation, ASME J. of Turbomachinery, Vol. 125, 2003, pp. 726-733
97. Tyagi, M., and Acharya, S., Large Eddy Simulation of an Inclined Film Cooling Jet, ASME J. of Turbomachinery, Vol. 125, 2003, pp. 734-742
98. Saha, A. K.., and Acharya, S., “Unsteady Flow and Heat Transfer in a Parallel Plate Heat Exchanger with In-Line and Staggered Array of Cylinders”, Numerical Heat Transfer-A, Vol. 45,  No. 2, 2004, pp. 101-133
99. Nasir, H., Ekkad, S. V., and Acharya, S., “Flat Surface Film Cooling from Cylindrical Holes with Discrete Tabs”, AIAA J. of Thermophysics and Heat Transfer, Vol. 17, No. 3, 2003, pp. 304-312
100. Nasir, H., Acharya, S., and Ekkad, S.V., “Improved Film Cooling From Cylindrical Angled Holes with Triangular Tabs: Effect of Tab Orientations”, Intl. J. of Heat and Fluid Flow, Vol. 24, No. 5, 2003, pp. 657-668
101. Tyagi, M., and Acharya, S., Large Eddy Simulation of Jets in Crossflow: I Effects of  Freestream Turbulence Intensity, Journal of Energy, Heat and Mass Transfer, Vol. 25, 2003, pp. 1-26
102. Tyagi, M., and Acharya, S., Large Eddy Simulation of Jets in Crossflow: II Effects of  Freestream Turbulence Length Scales, Journal of Energy, Heat and Mass Transfer, Vol. 25, 2003, pp. 95-116
103. Sharma, C., and Acharya, S., Direct Numerical Simulation of a Coolant Jet in a Periodic Crossflow, Journal of Energy, Heat and Mass Transfer, Vol. 25, 2003, pp. 177-204
104. Rein, P., Echeveri, L., and Acharya, S., Circulation in Vacuum Pans, Journal of the American Society of Sugar Cane Technologists, Vol. 24, June 2004, pp. 1-17
105. Panigrahi, P. K., and Acharya, S., “Multi-modal Forcing of the Turbulent Separated Shear Layer Flow Past a Rib”, ASME J. of Fluids Engineering, Vol. 126, No. 1, 2004, pp. 22-31
106. Acharya, S., and Panigrahi, P. K., Reattaching Shear Layer Behind a Rib-Turbulator Excited by Fundamental and Subharmonic Tones, J. of Wind Engineering & Industrial Aerodynamics, Vol. 92, 2004, pp. 1219-1244
107. Saha, A. K., and Acharya, S., LES and Unsteady RANS for Turbulent Flow and Heat Transfer in a Coolant Passage with an Array of Square Pin-Fins”, Numerical Heat Transfer-A, Vol. 46, No. 8, 2004, pp. 731-763
108. Uhm, J., and Acharya, S.,  Control of Combustion Instability Using a High-Momentum Air-Jet, Combustion and Flame, Vol. 139, 2004, pp. 106-125
109. Panigrahi, P. K., and Acharya, S., Excited Turbulent Flow Behind a Square Rib, J. of Fluids and Structures, Vol. 20, No. 2, 2005, pp. 235-253.
110. Saha, A., and Acharya, S., Flow and Heat Transfer in Internally Ribbed Ducts with Rotation:   An Assessment of LES and RANS, ASME J. of Turbomachinery, Vol. 127, No. 2, 2005, pp. 306-320
111. Acharya, S., Zhou, F., Lagrone, J.,  Mahmood, G., and Bunker, R., Latticework (Vortex) Cooling Effectiveness: Part 2 Rotating Channel Experiments, ASME J. of Turbomachinery, Vol. 127, July 2005, pp. 471-478
112. Tyagi, M., and Acharya, S., Large Eddy Simulation in Complex Geometries Using the Immersed Boundary Method, Intl. J. of Numerical Methods in Fluids, Vol. 48, 2005, pp. 691-722
113. Tyagi, M., and Acharya, S., Large Eddy Simulations for a Rotating Internally-Ribbed Coolant Channel, ASME Journal of Heat Transfer, Vol. 127, No. 5, 2005 pp. 486-498
114. Mahmood, G., Gustafson, R., and Acharya, S., Experimental Investigation of Flow Structure and Nusselt Number in a Linear Blade Cascade with and without Leading Edge Fillets, ASME Journal of Heat Transfer, Vol. 127, No. 5, 2005 pp. 499-512
115. Tuncer, O., Acharya, S., Banaszuk, A., and Cohen, J., Side Air-jet Modulation for Control of Heat Release and Pattern Factor, Comb. Science and Technology, Vol. 177, 2005,  pp. 1339-1364
116. Saha, A. K., and Acharya, S., Unsteady RANS Simulations of Turbulent Flow and Heat Transfer in Ribbed Coolant passages of Different Aspect Ratios, Intl. J. of Heat and Mass Transfer, Vol. 48, 2005, pp. 4704-4725
117. Uhm, J., Acharya, S., Open-Loop Control of Combustion Instability with a High-Momentum Air Jet, Combustion and Flame, in press, Vol. 142, No.4, 2005, pp. 348-363.
118. Echeveri, L. F., Rein, P.W., and Acharya, S., Numerical and Experimental Study of the Flow In Vacuum Pans, Zucker Industry Journal, Vol. 130, No. 7, 2005, pp. 538-544
119. Messina, T., and Acharya, S., “Characteristics of an Acoustically Modulated Spray Issued from Circular-orifice and Elliptical-Orifice Nozzles”, Atomization and Sprays, Vol. 16, No. 3, 2006, pp. 331-348
120. Kumar, S., Acharya, S., Beuerman, R., and Palkama, A., Numerical Solution of Ocular Fluid Dynamics in a Rabbits Eye, Annals of Biomedical Engineering, Vol 34. No. 3, March 2006, pp. 530-544  
121. Saha, A. K., and Acharya, S., Prakash, C. and Bunker, R., Blade Tip Desensitization with Pressure Side Winglet, International Journal of Roatatin Machinery, Vol. 2006, Article ID 17079
122. Muldoon, F., and Acharya, S., Budgets of the k-e model for Film Cooling and an Improved Damping Function Formulation, AIAA Journal. Vol. 44, No. 2, 2006, pp. 3010-3031
123. Uhm, J.J., and Acharya, S., Role of Low-Bandwidth Open-Loop Control of Combustion Instability Using a High-Momentum Air-Jet: Mechanistic Details, Combustion and Flame, Vol. 147, Issues 1-2, October 2006, Pages 22-31
124. Mahmood, G., and Acharya, S., Experimental Investigation of Secondary Flow Structures in a Blade Passage with and without Leading Edge Fillets, ASME J. of Fluids Engineering, accepted, in press, February 2007
125. Saha, A. K., and Acharya, S., Flow and Heat Transfer in Rotating Ribbed Passages of a Turbine Blade over an Extended Parametric Range, ASME J. of Heat Transfer, in press, April 2007 Issue.  
126. Saha, A. K., and Acharya, S., Computations of Turbulent Flow and Heat Transfer Through a Three-Dimensional Contoured Endwall Passage, ASME Journal of Turbomachinery, accepted January 2006.
127. Zhou, F., and Acharya, S., Heat Transfer at High Rotation Numbers in a Two-Pass 4:1AR Rectangular Channel with 45-degree Skewed Ribs, ASME Journal of Turbomachinery, accepted January 2006.
128. Sethuraman, E., Nikitopoulos, D., and Acharya, S., Mass/Heat Transfer in Rotating, Smooth High-Aspect Ratio (4:1) Coolant Channels with Curved Walls, ASME Journal of Turbomachinery, accepted January 2006.
129. Kumar, S., Acharya, S., and Beuerman, R., Deposition of Particles on Ocular Tissues and the Formation of Krukenberg Spindle, Hyphema, and Hypopyon, ASME Journal of Biomechanical Engineering, submitted January, 2005, revised version submitted, October 2005
130. Zhou, F., Lagrone, J., and Acharya, S., Internal Cooling of 4:1 Aspect Ratio Smooth Passages at High Rotation Numbers, Journal of Heat Transfer, accepted November 2006
131. Muldoon, F., and Acharya, S., An Efficient Parallel Method for the Pressure-Velocity Coupling of the Incompressible Navier-Stokes Equations, Intl. J. of Numerical Methods in Fluids, accepted October 2006
132. Tyagi, M., Roy, S., Harvey, A., and Acharya, S., Simulation of Laminar and Turbulent Flows in Impeller Stirred Tanks Using Immersed Boundary Method and Large Eddy Simulation with Multi-Block Curvilinear Geometry, Chemical Engng. Science, accepted November 2006
133. Acharya, S., Baliga, B., Karki, K., Murthy, J., Prakash, C., and Vanka, S. P., Pressure-Based Finite Volume Methods in Computational Fluid Dynamics, J. Heat Transfer, accepted December 2006

Revised Versions Pending Final Acceptance (#2)

134. Tuncer, O., Acharya, S., and Uhm, J., Control of Emissions and Heat Release Through Modulation of Transverse Air-Jets, ASME J. of Engineering for Gas Turbines and Power, submitted November 2004, revised version submitted, September 2005
135. Park, S., Acharya, S., and Kwon, J. H., An Improved k-e Model for Supersonic Base Blow, AIAA Journal, Submitted August 2006, revisions requested

Submitted & In Review (#3)

136. Muldoon, F., and Acharya, S., A Mass-Conserving Immersed Boundary Methodology, Journal of Computational Physics, Submitted, October 2005
137. Kathawate, J., Acharya, S., Computational Modeling of Intra-Vitreal Drug Delivery, Annals of Biomedical Engineering, submitted November 2006
138. Uhm, J. H., and Acharya, S., Amplitude-Limiting Feedback Control of Combustion Instability with a High-Momentum Air-Jet, Combustion Science and Technology, submitted January 2006.

Articles in Refereed Conferences (#175)

1. Acharya, S., and Patankar, S.V., "Use of an Adaptive Grid for Parabolic Flows", AIAA/ASME Joint Conference, Paper No. AIAA-82-1015, St. Louis, Missouri, June 7-11, 1982.
2. Acharya, S., and Goldstein, R.J., "Natural Convection in an Externally Heated Vertical or Inclined Square Box Containing Internal Energy Sources", ASME/AIChE National Heat Transfer Conference, Seattle, Washington, July 1982, Proceedings of ASME HTD-Vol. 26, pp. 17-26.
3. Acharya, S., and Patankar, S.V., "A Flux-Spline Calculation Procedure for Parabolic Flows", ASME Winter Annual Meeting, Paper No. 83-WA/HT-36, Boston, November 1983.
4. Acharya, S., and Tsang, C.H., "Influence of Wall Conduction on Natural Convection in an Externally Heated Vertical Square Box", Proceedings of the International Conference on Numerical Methods for Transient and Coupled Problems, Venice, Italy, July 1984.
5. Acharya, S., "Influence of Aspect Ratio on Natural Convection in Internally Heated Inclined Layers which are Heated or Cooled from Below", Proceedings of XII South Eastern Conference on Theoretical and Applied Mechanics, Vol. II, Callaway Gardens, Georgia, May 1984.
6. Burch, T., Rhodes, T., and Acharya, S., "Laminar Free Convection Between Finitely Conducting Vertical Plates", ASME Winter Annual Meeting, New Orleans, Paper No. 84-WA/HT-34, December 1984.
7. Tsang, C.H., and Acharya, S., "Natural Convection in an Inclined Enclosure with an Off-Center Complete Partition", ASME Winter Annual Meeting, New Orleans, December 1984, Proceedings of ASME HTD , Vol. 39, pp. 55-62.
8. Zimmerman, E., and Acharya, S., "Natural Convection in a Vertical Square Enclosure with Perfectly Conducting End Walls", Proceedings of the ASME Solar Energy Conference (SED - 8th Annual Conference), pp. 57-65, Anaheim, California, April 1986.
9. Habchi, S., and Acharya, S., "Laminar Mixed Convection in a Partially Blocked Vertical Channel", ASME/AIAA Joint Thermophysics Conference, Boston, June 1986, Proceedings of ASME HTD - Vol. 57, pp. 189-198.
10. Habchi, S., and Acharya, S., "Laminar Mixed Convection in a Symmetrically or Asymmetrically Heated Vertical Channel", ASME/AIAA Joint Thermophysics Conference, Paper No. 86-HT-21, Boston, June 1986.
11. Jang, D.S., and Acharya, S., "Calculation of Non-Equilibrium Effects in Turbulent Nonpremixed Combustion", ASME/AIChE National Heat Transfer Conference, Paper No. 87-HT-52, Pittsburgh, August 1987.
12. Zimmerman, E., and Acharya, S., "Natural Convection in an Enclosure with a Vertical Baffle", Proceedings of the 5th International Conference on Numerical Methods in Thermal Problems, Vol. V, Part 1, pp. 392-403, Montreal, Canada, June 1987.
13. Cundy, V.A., Lester, T.W., Sterling, A.M., and Acharya, S., "Flame Zone Sampling of Rotary Kilns", Proceedings of the Rotary Kiln Incineration of Hazardous Waste Conference, Hazardous Waste Research Center, Louisiana State University, Baton Rouge, LA, November, 1987, pp. 205-224.
14. Lester, T.W., Sterling, A., Acharya, S., Cundy, V.A., and Pershing, D.W., "An Investigation of Rotary Kiln Incineration Performance", U.S. EPA Research Symposium on the Incineration and Land Disposal of Hazardous Wastes, Cincinnati, Ohio, May 1987.
    
15. Lester, T.W., Cundy, V.A., Sterling, A.M., Acharya, S., and Pershing, D.W., "An Indepth Study of Rotary Kiln Incineration", Proceedings of the First Annual Symposium on Hazardous Waste Research, Baton Rouge, LA, October 1987, pp. 2-17.
16. Jang, D.S., and Acharya, S., "Pulverized Coal Combustion Modeling with an Improved Stochastic Model for Turbulent Particle Dispersion", Proceedings of the XIV South Eastern Conference on Theoretical and Applied Mechanics, (entitled Developments in Theoretical and Applied Mechanics, Vol. XIV), pp. 494-500, Biloxi, Mississippi, April 1988.
17. Yucel, A., and Acharya, S., "Natural Convection of a Radiating Fluid in a Partitioned Enclosure", XIV South Eastern Conference on Theoretical and Applied Mechanics, Biloxi, Mississippi, April 1988.
18. Jang, D.S., and Acharya, S., "Two Dimensional Modeling of Waste Combustion in a Kiln", AIChE Spring Meeting, New Orleans, March 1988.
19. Sterling A.M., Cundy, V.A., Lester, T.W., Acharya, S., Montestruc, A.N., and Morse, J.S., "Insitu Sampling from an Industrial Scale Rotary Kiln", 3rd Chemical Congress of North America, American Chemical Society, Toronto, Canada, June 1988, also in Emissions from Combustion Processes:  Orgin, Measurement, Control, CRC Publishers, Eds. R. E. Clement and R.O. Kagel, Lewis Publishers, Michigan, 1990, pp. 319-335.
20. Yucel, A., Acharya, S., and Williams, M.L., "Combined Natural Convection and Radiation in a Rectangular Enclosure", ANS/AICHE/ASME National Heat Transfer Conference, Houston, August 1988, Proceedings of ASME - HTD, Vol. 96, pp. 209-218.
21. Lester, T.W., Cundy, V.A., Sterling, A.M., Acharya, S., and Pershing, D.W.,"An Indepth Study of Incineration-Rotary Kiln Performance", Proceedings of the Second Annual Symposium on Hazardous Waste Research, Baton Rouge, LA, October 1988.
22. Cundy, V.A., Lester, T.W., Sterling, A.M., Pershing, D.W., Lighty, T.S., Owens, Acharya, S., W.D., Morse, S., Leger, C., and Montestruc, A.N., "Rotary Kiln Incineration", EPA Fifteenth Annual Research Symposium on Remedial Action, Treatment and Disposal of Hazardous Waste, Cincinnati, Ohio, April, 1989.
23. Lester, T.W., Cundy, V.A., Leger, C., Montestruc, A., Acharya, S., and Sterling, A.M., "Dynamics of Rotary Kiln Incineration of Toulene/Sorbent Packs", Proceedings of First International Congress on Toxic Combustion Bi-Products: Formation and Control, Los Angeles, August 1989.
24. Cundy, V.A., Lester, T.W., Sterling, A.M., Leger, C., Miller, G., Montestruc, A.N., Acharya, S., Pershing, D.W., Owens, W.D., Lighty, J.S., and Silcox, G.P., "Rotary Kiln Incineration - Insitu Field Measurements and Laboratory Simulation", Proceedings of 8th International Conference on Thermal Destruction of Hazardous, Radioactive, Infectious and Mixed Wastes (1989 Incineration Conference), ASME, Knoxville, Tennessee, May 1989.
25. Yucel, A., and Acharya, S., "Combined Natural Convection and Radiation in Partitioned Enclosures", Proceedings of Ninth International Heat Transfer Conference, Jerusalem, Israel, 19-24 August, 1990.
26. Harvey, A., Acharya, S., and Lawrence, S., "A Solution Adaptive Grid procedure for an Upwinded Parabolized Flow Solver", 21st AIAA Fluid Dynamics, Plasmadynamics and Lasers Conference, Paper No. AIAA-90-1567, Seattle, June 18-20, 1990.
27. Yucel, A. and Acharya, S., "Natural Convection of a Radiating Fluid in a Partially Divided Square Enclosure", ASME Winter Annual Meeting, Dallas, November 1990, Proceedings of ASME  HTD - Vol. 157, pp. 19-28.
    
28. Mehrotra, A. and Acharya, S., "An Experimental Study of Natural Convection Heat Transfer in Smooth and Ribbed Vertical Channels", ASME Winter Annual Meeting in Symposium Volume (ASME HTD - Vol. 144) entitled "Convective Heat Transfer in the Presence of an Obstructing Medium", pp. 23-32, Dallas, November 1990.
29. Rhodes, T. and Acharya, S., "Adaptive Improvements to the Calculation of Convection-Diffusion Problems Using Local Higher Order Schemes in High Error Estimate Regions, ASME Winter Annual Meeting, Dallas, November 1990, Proceedings of ASME entitled Recent Advances and Applications in Computational Fluid Dynamics, ASME  FED - Vol. 103, pp. 23-30.
30. Jang, D.S., Kim, Y.D., and Acharya, S., "Modeling and Prediction of Nonequilibrium Turbulent Flame in a Non Premixed LNG-fired Combustor", The 2nd KSME-JSME Fluids Engineering Conference, Seoul, Korea, October 1990.
31. Harvey, A., Acharya, S. and Lawrence, S.L., "A Solution Adaptive-Grid Procedure for the Three-Dimensional Parabolized Navier-Stokes Equations", AIAA 28th Aerospace Sciences, Paper No. AIAA-91-0104, Reno, Nevada, January 1991.
32. Jang, D.S., Acharya, S., West, D. and Herbert, L., "A Moment Closure Method for Modleing Multistep Chlorination Reactions", AIChE Spring Meeting, Paper No. AIChE 91/33a, Houston, April 1991.
33. Harvey, A, Acharya, S. and Lawrence, S., "Prediction of Complex Three-Dimensional Flowfields Using Solution-Adaptive Mesh Algorithms", 9th AIAA Applied Aerodynamics Conference,  Paper No. AIAA-91-3237, Baltimore, September 1991.
34. Myrum, T. Acharya, S., Inamdar, S. and Mehrotra, A., "Vortex Generator Induced Heat Transfer Augmentation Past a Rib in a Heated Duct Air Flow", ASME/AIChE National Heat Transfer Conference, Minneapolis, July 1991, ASME-HTD -Vol. 168, pp. 61-69.
35. Dutta, S., and Acharya, S., "Heat Transfer and Flow Past a Backstep with a Nonlinear k- Model and the Modified k- Model",  ASME National Heat Transfer Conference,  San Diego, August 1992, ASME-HTD-Vol. 206-1, pp. 95-104.
36. Rhodes, T., and Acharya, S., "An Adaptive Differencing Scheme for Flow and Heat Transfer Problems", ASME Winter Annual Meeting, Anaheim, CA, 1992, ASME-HTD-Vol. 208, pp. 9-18.
37. Acharya, S., "Solution Adaptive Procedures for Heat Transfer Problems" Fourth Intl. Conf. on Computational Engg. Science, Hong Kong, December 1992.
38. Acharya, S.,  Myrum, T., Baker, R. S., "Turbulent Flow and Heat Transfer Past A Surface-Mounted Two-Dimensional Rib. PartI: Measurements", ASME National Heat Transfer Conference, Atlanta, August 1993, ASME-HTD-Vol. 239, pp. 27-34.
39. Acharya, S., Dutta, S., Myrum, T., "Turbulent Flow and Heat Transfer Past A Surface-Mounted Two-Dimensional Rib. PartII: Predictions", ASME National Heat Transfer Conference, Atlanta, August 1993, ASME-HTD-Vol. 239, pp. 35-49.
40. Moukalled, F., and Acharya, S., "Natural Convection Around a Horizontal Circular Cylinder Placed Concentrically in a Square Enclosure", Proceedings of the Sixth International Symposium on Transport Phenomena in Thermal Engineering,  Seoul, Korea, May 1993, pp. 157-162.
    
41. Ning., H., Nikitopoulos, D., and Acharya, S., "Large Scale Effects Incorporated Into Free-Shear Layer Calculations by Using Non-Linear Stability Principles", in Turbulent Mixing, D. E. Parekh, M. J. Norris, Eds., ASME Winter Annual Meeting, New Orleans, Nov. 1993, ASME-FED-Vol. 174, pp. 49-56.
    
42. Yucel, A. and Acharya, S., "Natural Convection of a Radiating Fluid in a  Square Enclosure With Perfectly Conducting End Walls", Proceedings of the First ISHMT -ASME Heat and Mass Transfer Conference, Bombay, January 1994, pp. 355-363.
43. Acharya, S., and Dixit, G.,"Laminar Mixed Convection in a Vertical Channel with a Backstep: A Benchmark Study", ASME Winter Annual Meeting, New Orleans, Nov. 1993, ASME-HTD-Vol. 258, pp. 11-20.
44. Moukalled, F., Darwish, M., and Acharya, S., "Laminar Mixed Convection Heat Transfer in Externally Finned Pipes", ASME  Fluids Engineering Division Summer Meeting, June 1994, in ASME-FED-Vol. 196, pp. 387-392.
45. Acharya, S., Myrum, T., Sinha, S., and Qiu, X., "Developing and Periodically Developed  Flow, Temperature and Heat Transfer in a Ribbed Duct", ASME-JSME  Thermal Engg. Joint Conference, Hawai, 1995
46. Ning, H., Acharya, S., and Nikitopoulos, D. E., "Simulation of Particle Laden Mixing Layer Including Large-Eddy Effects", in Gas-Particle Flows, ASME/JSME Fluids Engineering Division Summer Meeting, Hilton Head, SC, ASME-FED-Vol. 228, pp. 69-81, August 1995
47. Acharya, S., Myrum, T. A., and Dutta, S., "Heat Transfer in Turbulent Flow Past a Surface-Mounted Two-Dimensional Rib", ASME Winter Annual Meeting, San Francisco, Nov.  1995.
48. Myrum, T. A., Acharya, S., and Inamdar, S., "Laminar Pulsed Flow and Heat Transfer in a Vertical Isothermal Tube with and without Buoyancy", ASME Winter Annual Meeting, San Francisco, Nov.  1995.
49. Fabien, I., and Acharya, S., " An Improved k-e Model for Compressible Flows", AIAA Conference, Reno. January 1996, AIAA-96-0428
50. Pointel, G., Acharya, S., and Sharma, C., "DIrect Numerical SImulations of Convective Heat Transfer", 1996 Energy Technology Conference and Exposition, Houston, January 1996.
51. Hibbs, R., Acharya, S., Chen, Y., Nikitopoulos, D., and Myrum, T., "Heat Transfer in a Two-Pass Internally Ribbed Turbine Blade Coolant Channel with Cylindrical Vortex Generators", ASME-Intl. Gas Turbine Inst. Meeting, Birmingham, June 1996, Paper Number ASME-96-GT-474.
52. Panigrahi, P., and Acharya, S., "Spectral Characteristics of Turbulent Separated Flow Behind a Surface Mounted Rib", AIAA  Summer Fluids Conference, New Orleans, July 1996, AIAA-96-1931.
53. Hibbs, R., Acharya, S., Chen, Y., and Nikitopoulos, D., “Heat/Mass Transfer in a Two-Pass Rotating Smooth and Ribbed Channel”, ASME National Heat Transfer Conference, Houston, August 1996, ASME HTD-324, Vol II, pp. 123-136.
54. Acharya, S., and Hibbs, R., “Heat Transfer Enhancements in Internally Ribbed Coolant Channels of Gas Turbine Blades”, ASME National Heat Transfer Conference, Houston, August 1996
55. Hibbs, R., Acharya, S., Chen, Y., Nikitopoulos, D., and Myrum, T., "Heat Transfer in a Two-Pass Internally Ribbed Turbine Blade Coolant Channel with Cylindrical Vortex Generators", ASME-International Mechanical Engineering Congress and Exposition (IMECE), Atlanta, November 1996, ASME Paper Number 96-WA/HT-11
56. Chen, Y., Nikitopoulos, D., Hibbs, R., Acharya, S., and Myrum, T., "Detailed Heat/Mass Transfer Distribution in a Ribbed Coolant Passage", ASME-International Mechanical Engineering Congress and Exposition (IMECE), Atlanta, November 1996, ASME Paper Number 96-WA/HT-10
57. Stephens, J. R., Acharya, S., and Gutmark, E. J., “Controlled-Swirl-Stabilized Spray Combustor” 35th Aerospace Sciences Meeting, Reno. January 1997,AIAA-97-0464
58. Panigrahi, P., and Acharya, S., “Mechanisms of Turbulence Transport for Flow Past a Rib in the Internal Coolant Passage of a Gas Turbine Blade” ASME-International Gas Turbine Conference, 1997, Orlando
59. Acharya, S., and Chopin, T., “Adaptive-Multigrid Differencing Strategies for Control Volume Based Predictive Procedures”, ASME-National Heat Transfer Conference, Baltimore, August 1997
60. Moukalled, F., Doughan, A., and Acharya, S., “Mixed Convection Heat Transfer in Concave and Convex Channels”, ASME-National Heat Transfer Conference, Baltimore, August 1997 HTD-346, Volume 8, edited by P.H.Oosthuizen, T.S. Chen, S. Acharya, B.F. Armaly, and D.W.Pepper
61. Hibbs, R., Acharya, S., Chen, Y., and Nikitopoulos, D. E., “Mass/Heat Transfer in a Ribbed Coolant Passage with Cylindrical Vortex Generators: The Effect of Generator-Rib Spacing”, ASME-International Gas Turbine Conference, 1997, Orlando, ASME Paper Number 97-GT-161
62. Stephens, J., Acharya, S., and Gutmark., E.,  “Swirl-Stabilized Spray Combustion with Periodic Heat Addition”, Central States Meeting, Clear Point, Alabama, April 1997, pp. 148-153 in “Combustion Fundamentals and Applications” edited by Gore, Stocker and Midkiff.
63. Stephens, J. R., Acharya, S., Gutmark., E., and Allgood, D., “Active Forcing of Air- and Fuel-Feeds in Swirl Stabilized Spray Combustion”, ISABE 97-7209, XIII International Symposium on AirBreathing Engines, Chattanooga, TN, September 1997
64. Stojkovic., B. D., Acharya, S., Morgan, T., Zanca, K., Graf, M., Gutmark, E., “A Numerical Analysis of a Conical Swirl-Stabilized Spray Burner”, ASME-International Mechanical Engineering Congress and Exposition (IMECE), Dallas, November 1997, ASME-HTD-Vol. 352, pp. 109-118
65. Stephens, J., Acharya, S., Gutmark, E., and Allgood, D., “Open Loop Control of a Swirl-Stabilized Diffusion Flame”, 36th Aerospace Sciences Meeting, Reno. January 1998,AIAA-98-0351
66. Acharya, S., and Li, J., “Flame Stabilization Through Forcing”, 36th Aerospace Sciences Meeting, Reno. January 1998,AIAA-98-0644
67. Muldoon, F., and Acharya, S., “Dynamics of Large Scale Structures for Jets in CrossFlow”, accepted ASME-International Gas Turbine Conference, 1998, Stockholm, Paper ASME 98-GT-019
68. Sharma, C., and Acharya, S., “Direct Numerical Simulation of Flow and Heat Transfer in a Periodic Channel Flow with Slot Injection and Suction: I- Injection Results” ASME-International Mechanical Engineering Congress and Exposition (IMECE), Anaheim, November 1998, HTD Vol 361-1, pp. 363-388
69. Li, J., and Acharya, S., “Temperature and Flow Characteristics in a Conical High-Swirl Burner”, Central States Meeting, 1998 Combustion Institute, Lexington, KY, June 1998.
    
70. Acharya, S., Gutmark, E., Li, J., Stephens, J., Murugappan, S., and Allgood, D., “Control of Swirl Stabilized Spray Combustion”, IECEC 98 Conference, Colorado Springs, August 1998, Paper # I385
71. Jones, R., Harvey, A., Acharya, S., “Low-Re Turbulence Modeling of Impeller-Stirred-Tank-Reactors,” AIChE 1997 National Meeting, Anaheim, CA
72. Chandra, P., Acharya, S., Sebastijanovic, N., and Panigrahi, P., “The Effect of Forcing on Scalar Transport in a Co-Axial Combustor Geometry”, ASME-International Mechanical Engineering Congress and Exposition (IMECE), Anaheim, November 1998
73. Stephens, J., Acharya, S., and Gutmark, E., “An Experimental Study of Swirl-Stabilized Spray Combustion with Active Forcing”, 37th Aerospace Sciences Meeting, Reno. January 1999,AIAA-99-0437
74. Moukalled, F., Doughan, A., and Acharya, S., “Prandtl Number Effect on Mixed Convection Heat Transfer in Concave and Convex Channels”, ASME-JSME Heat Transfer Conference, San Diego, March 1999.
75. Panigrahi, P., and Acharya, S., “Analysis of Large Scale Structures in Separated Shear Layers”, ASME-JSME Heat Transfer Conference, San Diego, March 1999
76. Seffal, R., Michaelides, E. E., Nikitopoulos, D. E., and Acharya, S., “Particle Dispersion due to the Large Scale Structures of an Axisymmetric Jet”,in Particle-Interactions in Fluid-Particle Systems, Annual AIChE Meeting and Particle Technology Forum, Miami Beach, Proceedings AIChE Meeting, pp. 99-106, November 1998
77. Eliades, V., Nikitopoulos, D. E., and Acharya, S., “Detailed Mass Transfer Distribution in Rotating Two-Pass Ribbed Coolant Channels with Vortex Generators” ASME-IGTI Intl. Gas Turbine Conference, Indianapolis, June 1999.
78. Santhanam, V., Knopf, F. C., Acharya, S., and Gutmark, E., “PLIF and Temperature Measurements in an Actively Forced Swirl-Stabilized Spray Combustor”, ASME-IGTI Intl. Gas Turbine Conference, Indianapolis, June 1999, ASME-99-GT-117
79. Hoda, A., and Acharya, S., “Predictions of a Film Coolant Jet in Crossflow with Different Turbulence Models”, ASME-IGTI Intl. Gas Turbine Conference, Indianapolis, June 1999, ASME-99-GT-214
80. Muldoon, F., and Acharya, S., “Numerical Investigation of the Dynamical Behavior of a Row of Square Jets in Crossflow over a Surface”, ASME-IGTI Intl. Gas Turbine Conference, Indianapolis, June 1999, ASME-99-GT-217
81. Tyagi, M., and Acharya, S., “Large Eddy Simulation of Rectangular Jets in Crossflow: Effect of Hole Aspect Ratio”, AFSOR Conference on DNS/LES, Rutgers Univ., NJ, June 1999, Proceedings, Kulwer Pub.
82. Tyagi, M., and Acharya, S., “Large Eddy Simulation of a Jet in Crossflow: Freestream Turbulence Effects”, ASME-FEDSM 99-7799, ASME/JSME Fluids Engineering Meeting, San Francisco, July 1999.
83. Jones, R., Harvey, A., and Acharya, S., “Low Reynolds Number Turbulence Modeling of Stirred Tank Flows”, ASME/JSME Fluids Engineering Meeting, San Francisco, July 1999.
84. Ekkad, S.,  Pamula, G., and Acharya, S., “Influence of Crossflow Induced Swirl and Impingement on Heat Transfer in an Internal Coolant Passage of a Turbine Airfoil”, ASME-IMECE, Nashville, Nov. 1999
85. Tyagi, M., and Acharya, S., “Large Eddy Simulations of an Inclined Jet in Crossflow”, Proc. ASME-ISHMT Heat transfer Conference, Pune, January 2000, pp. 1353-1358
86. Tyagi, M., and Acharya, S., “Large Eddy Simulation of Jets in Crossflow: Large Scale Turbulence Efffects”, ASME-Intl. Mech. Engng. Congress and Exposition, Nashville, November, 1999
87. Murugappan, S., Acharya, S., Gutmark, E. J., and Messina, T., “Characteristics and Control of Combustion Instabilities in a Swirl-Stabilized Spray Combustor”, 35th AIAA/ASME Joint Propulsion Conference and Exhibit, June 1999, Los Angeles, AIAA-99-2487
88. Murugappan, S., Gutmark, E. J., and Acharya, S., “Application of Extremum Seeking Controller for Suppression of Combustion Instabilities in Spray Combustion”, 38th Aerospace Sciences Meeting, Reno. January 2000,AIAA-2000-1025
89. Allgood, D., Gutmark. E., and Acharya, S., “Open-Loop Control of a Coaxial Jet Spray Combustor”, 38th Aerospace Sciences Meeting, Reno. January 2000,AIAA-2000-1026
90. Nasir, H., Ekkad, S. V., Acharya, S., “Effect of Compound Angle injection on Flat Surface Film Cooling with Large Streamwise Injection Angle”  8th Intl. Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, March 2000
91. Pamula, G., Ekkad, S.,  and Acharya, S., “Influence of Crossflow Induced Swirl and Impingement on Heat Transfer in an Internal Coolant Passage of a Turbine Airfoil Connected by Two Rows of Holes” ASME-Intl. Gas Turbine Conference, May 2000, Munich
92. Li, J., and Acharya, S., “Velocity measurements in a Swirl-Stabilized Combustor Undergoing Limit-Cycle Pressure Oscillations”, ASME-Intl. Gas Turbine Conference, May 2000, Munich
93. Allgood, D., Murugappan, S., Acharya, S., and Gutmark, E., “Infra-Red Temperature Measurements in an Actively Controlled Spray Combustor”, ASME-Intl. Gas Turbine Conference, May 2000, Munich,ASME-GT-2000-0096
94. Hoda, A., Acharya, S., and Tyagi, M., “Predictions of a Jet-In-Crossflow with Reynolds Stress Transport Models and Large Eddy Simulations”, ASME-Intl. Gas Turbine Conference, May 2000, Munich, ASME-GT-2000-0249
95. O’ Donnell, M., and Acharya, S., “Characterization of the Velocity Fields in a Spray Combustor with and without Closed loop Control”, ASME Energy Week Conference, New Orleans, Feb. 2000
96. Acharya, S, Tyagi, M., Hoda, A., and Muldoon, F., “ From RANS to DNS: Application to Film Cooling”, 26th National Conference on Fluid Mechanics & Fluid Power, 15 - 17th Dec 1999, IIT, Kharagpur, INDIA, Invited Plenary Lecture
97. Acharya, S., Eliades, E., and Nikitopoulos, D., “Heat Transfer Enhancements in Rotating Two-Pass Coolant Channels with Profiled Ribs”, ASME-Intl. Gas Turbine Conference, May 2000, Munich
98. Nikitopoulos, D., Eliades, V., and Acharya, S., “Detailed Measurements of Enhanced Heat Transfer in a two-Pass Rotating Channel for Two profiled Rib-Configurations”, ASME-Intl. Gas Turbine Conference, May 2000, Munich
99. Murugappan, S., Gutmark, E., Acharya, S., and Krstic, M., “Extremum Seeking Adaptive Controller for Swirl-Stabilized Spray Combustion”, 28th Symposium (Intl.) on Combustion, The Combustion Institute, July 2000, Edinburgh, Scotland
    
100. Acharya, S., and Panigrahi, P., “Turbulent Separated Shear-Layer Flow Past a Rib Forced by the Fundamental”, 2000 ASME Fluids Engineering Division Summer Meeting, Boston, MA June 11-15, 2000
101. 101. Murugappan, S., Park, C., Acharya, S., Annaswamy, A, Gutmark, E., and Ghoneim, A., “Optimal Control  of Swirl-Stabilized Spray Combustion Using System iidentification Approach”, Turbine-2000, Intl. Symposium on Gas Turbine Heat Transfer, August, Cesme, Turkey
102. Acharya, S., Hoda, A., Tyagi, M., “Flow and Heat Transfer Predictions of Film Cooling”, Turbine-2000, Intl. Symposium on Gas Turbine Heat Transfer, August, Cesme, Turkey, Invited Paper
103. Acharya, S., and Zhou, F., “Flow and heat Transfer in Dimpled Two-pass Channel”, Turbine-2000, Intl. Symposium on Gas Turbine Heat Transfer, August, Cesme, Turkey,
104. Morris, T.E., Murphy, M.C., and Acharya, S. (2000) "Microfabrication of a metal fuel injector nozzle array," in Micromachining and Microfabrication Process Technology IV, eds. J.M. Karam and J. Yasaitis, Society of Photo-optical Instrumentation Engineers (SPIE), Volume 4174, pp. 58-65.
105. Ekkad, S., Hasan, N., and Acharya, S., “Film Cooling on a Flat Surface with a Single Row of Cylindrical Angled Holes: Effect of Discrete Tabs”, ASME-Intl. Mech. Engng. Congress and Exposition, Orlando, November, 2000
106. Acharya, S., and Zhou, F., “Mass/Heat Transfer in Rotating Dimpled Turbine Blade Coolant Passages”, ASME-Intl. Mech. Engng. Congress and Exposition, Orlando, November, 2000
107. Murugappan, S., Park, S., Acharya, S., Annaswamy, A., Ghoneim, A., “Optimal Control of Swirl-Stabilized Spray Combustion using System-Identification Approach”,  39th AIAA Aerospace Sciences Meeting and Exhibit, Reno, January 2001, AIAA 2001-0779
108. Panigrahi, P., and Acharya, S., “Multi-modal Forcing of the Turbulent Separated Shear Flow Past a Rib”, 39th AIAA Aerospace Sciences Meeting and Exhibit, Reno, January 2001, AIAA 2001-1020
109. Mancilla, C., Chakka, P., and Acharya, S.,Performance of a Trapped Vortex Spray Combustor, ASME-Intl. Gas Turbine Conference, June 2001, New Orleans
110. Allgood, D., Campos-Delgado, D., Acharya, S., and Zhou, K., Acoustic Control of thermoacoustic Instabilities Using Experimental Model-Based Controllers, ASME-Intl. Gas Turbine Conference, June 2001, New Orleans
111. Hasan, N., Acharya, S., and Ekkad, S., Film Cooling on a Flat Surface from Cylindrical Inclined Holes with Delta Tabs: Effect of Tab Orientations, ASME-Intl. Gas Turbine Conference, June 2001, New Orleans
112. Pamula, G., Ekkad, S., Acharya, S., Effect of Rib Turbulators in the First Pass on Heat Transfer Distributions in a Two-Pass Channel Connected by Two Rows of Holes”, ASME-Intl. Gas Turbine Conference, June 2001, New Orleans
113. Messina, T., and Acharya, S., Characteristric of a Two-Phase Spray Issued from Asymmetric Nozzles, 4th International Conference on Multiphase Flows, May 27-June 1, 2001, New Orleans
114. Messina, T., and Acharya, S., Characteristics of an Acoustically Modulated Spray Issued from Circular-Orifice and Elliptical Orifice Nozzles, ASME-FED Summer Meeting, May 28-June 1, 2001, New Orleans
115. Saha, A. K., and Acharya, S., Flow and Heat Transfer in a Micro-Channel Heat Exchanger with In-line Array of Cylinders, ASME-IMECE Meeting, November 2001, New York, ASME-IMECE2001/HTD24394.
116. Saha, A. K., and Acharya, S., Flow and Heat Transfer in a Micro-Channel Heat Exchanger with In-line and Staggered Array of Cylinders, ASME-ISHMT Meeting, January 2002, Calcutta
117. O’ Donnell, M., and Acharya, S., Simultaneous Measurements of Velocity, Drop Size and Temperature in a Spray Flame Using an Integrated Phase-Doppler/Rainbow Thermometer, ASME-IMECE, November 2001, New York, ASME-IMECE2002/HTD24257
118. Chandra, P., Acharya, S., and C. L. Lau, The Effect of Multi-Modal Forcing on Thermal Transport in a Co-axial Combustor Geometry, ASME-IMECE, November 2001, New York, Paper Number ASME-IMECE2002/HTD24102
119. Campos-Delgado, D., Allgood, Zhou, K., and Acharya, S., Identification and Active Control of Thermoacoustic Instabilities, 2001 IEEE Conference on Control Applications, Mexico City, September 2001
120. Allgood, D., Campos-Delgado, D., Acharya, S., and Zhou, K., Active Control of Combustion  Instabilities Using Experimental Model-Based Controllers, 26th Annual Dayton-Cincinnati Aerospace Science Symposium, 2001, Winner of the Best Paper Award in the Combustion Section
121. Tyagi, M., Saha, A., and Acharya, S., Large Eddy Simulations of Rotating Square Duct with Normal Rib Turbulators, Third AFOSR International Conference on Direct Numerical Simulation and Large Eddy Simulation, Arlington, August 2001
122. Tyagi, M., and Acharya, S., Flow and Heat Transfer predictions for the film-cooling flow using large eddy simulations,  Third AFOSR International Conference on Direct Numerical Simulation and Large Eddy Simulation, Arlington, August 2001
123. Tyagi, M., and Acharya, S., Large Eddy Simulations of Complex Turbulent Flows Using Immersed Boundary Methods, Third AFOSR International Conference on Direct Numerical Simulation and Large Eddy Simulation, Arlington, August 2001
124. Datta, P., Namburi, L., Podlaha, E.J., Acharya, S., and Murphy, M.C. (2001) "Design and Fabrication of Thermomechanical Microactuator for High Temperature  Applications,"  at HARMST 2001, Baden-Baden, Germany, June 2001
125. Saha, A. K., and Acharya, S., Large Eddy Simulation of Flow and Heat Transfer in a Rotating Ribbed Channel, 9th Intl. Symp. On Transport Phenomena and Dynamics of Rotating Machinery, Hawai, 2002, Paper Number ISROMAC-HT-ABS-014.
126. Acharya, S., and Tyagi, M., A Perspective on Film Cooling Computations, Proceedings of the Intl. Symp. On Recent Trends in Heat and Mass Transfer, Jan. 2002, pp. 287-313, Guwahati.
127. Yang, H., Acharya, S., Ekkad, S., Prakash, C., and Bunker, R., Flow and Heat Transfer Predictions Past a Flat-Tip Blade, ASME Intl. Gas Turbine Conference, Amsterdam, 2002, ASME-GT-2002-30190
128. Yang, H., Acharya, S., Ekkad, S., Prakash, C., and Bunker, R., Flow and Heat Transfer Predictions Past a Squealer-Tip Blade, ASME Intl. Gas Turbine Conference, Amsterdam, 2002, ASME-GT-2002-30193
129. Acharya, S., Yang, H.,  Prakash, C., and Bunker, R., Numerical Simulation of Film Cooling past a Turbine Blade Tip, ASME Intl. Gas Turbine Conference, Amsterdam, 2002, ASME-GT-2002-30553
130. Saha, A. K., and Acharya, S., Effect of Cylinder Aspect Ratio and Channel Dimensions on the Fluid Flow and Heat Transfer in Parallel-Plate Heat Exchangers, ASME IMECE 2002, New Orleans, ASME IMECE2002-34407
131. Agarwal, P., Acharya, S., and Nikitopoulos, D. E., Heat Transfer in 1:4 Rectangular Passages with Rotation, ASME Intl. Gas Turbine Conference, Atlanta, 2003, ASME-GT-2003-38615
132. Acharya, S., Yang, H., Bunker, R., and Prakash, C., A Numerical Study of Heat Transfer   on Blade Tips with Different Squealer Configurations, ASME Intl. Gas Turbine Conference, Atlanta, 2003, ASME-GT-2003-38617
133. Saha, A., and Acharya, S., Flow and Heat Transfer in Internally Ribbed Ducts with Rotation: An Assessment of LES and RANS, ASME Intl. Gas Turbine Conference, Atlanta, 2003, ASME-GT-2003-38619
134. Saha, A., Acharya, S., Bunker, R., and Prakash, C., Blade Tip Leakage Flow and Heat Transfer with Pressure-Side Winglet: Flat  and Squealer Tips,  ASME Intl. Gas Turbine Conference, Atlanta, 2003, ASME-GT-2003-38620
135. Tuner, O., Acharya, S., Banaszuk, A., and Cohen, J., Side Air-Jet Modulation for Control of Heat Release and Pattern Factor, ASME Intl. Gas Turbine Conference, Atlanta, 2003, ASME-GT-2003-38853
136. Tyagi, M., and Acharya, S., Large Eddy Simulation of an Inclined Film Cooling Jet, ASME Intl. Gas Turbine Conference, Atlanta, 2003, ASME-GT-2003-38633
137. Kumar, S., Acharya, S., Beuerman, R., and Palkama, A., Ocular Fluid Dynamics in a Rabbit Eye, ASME-National Heat Transfer Conference, 2003, Las Vegas, ASME HT2003-47582
138. Uhm, J., and Acharya, S., Control of Thermo-acoustic Instabilities Using a High-Momentum Air-Jet, Intl Colloqium on Combustion and Noise Control,  Cranfield University, Cranfield, England, August 12-15, 2003
139. Tyagi, M., and Acharya, S., Large Eddy Simulation in Complex and Moving Geometries Using Immersed Boundary Methods, ASME IMECE 2003, Washington D. C.
140. Saha, A. K., and Acharya, S., Unsteady RANS Simulations of  Turbulent Flow and Heat Transfer in a Channel with a Periodic Array of Square Fins”, ASME IMECE 2003, Washington D. C.
141. Datta, P., Sathe, M., Namburi, L., Podlaha, E.J., Acharya, S. and Murphy, M.C., "Microfabricated bimetallic actuator," in MEMS Components and Applications for Industry, Automobiles, Aerospace, and Communication II, ed. S.W. Janson, Society of Photo-optical Instrumentation Engineers (SPIE), Volume 4981, 2003, pp. 83-94.
142. Saha, A. K., Acharya, S., Unsteady Computations for Flow and Heat Transfer in 1:1, 4:1, 1:4 AR Ribbed Coolant Passages with Rotation, ASME Intl. Gas Turbine Conference, Vienna, Austria, 2004, ASME-GT-2004-53986
143. Zhou, F., Lagrone, J., and Acharya, S., Internal Cooling in 4:1 AR Passages at High Rotation Numbers, ASME Intl. Gas Turbine Conference, Vienna, Austria, 2004, ASME-GT-2004-53501
144. Muldoon, F., and Acharya, S., Direct Numerical Simulation of a Film Coolant Jet, ASME Intl. Gas Turbine Conference, Vienna, Austria, 2004, ASME-GT-2004-5350
145. Agarwal, P., Acharya, S., and Nikitopoulos, D. E., Heat/Mass Transfer in a 4:1 AR Smooth and Ribbed Coolant Passage with Rotation at 90-degree and 45-degree Orientations, ASME Intl. Gas Turbine Conference, Vienna, Austria, 2004,
146. Acharya, S., Zhou, F., Lagrone, J.,  Mahmood, G., and Bunker, R., Latticework (Vortex) Cooling Effectiveness: Part 2 Rotating Channel Experiments , ASME Intl. Gas Turbine Conference, Vienna, Austria, 2004, ASME-GT-2004-53983
147. Uhm, J., Acharya, S., Open-Loop Control of Combustion Instability with a High-Momentum Air Jet , ASME Intl. Gas Turbine Conference, Vienna, Austria, 2004, ASME-GT-2004-53989
148. Tyagi, M., and Acharya, S., Large Eddy Simulations for a Rotating Internally-Ribbed Coolant Channel, ASME Intl. Gas Turbine Conference, Vienna, Austria, 2004, ASME-GT-2004
149. Datta, P., Sathe, M., Namburi, L., Podlaha, E.J., Acharya, S. and Murphy, M.C., Microfabricated bimetallic actuator, in MEMS Components and Applications for Industry, Automobiles, Aerospace, and Communication II, ed. S.W. Janson, Society of Photo-optical Instrumentation Engineers (SPIE), Volume 4981,  2003, pp. 83-94
150. Echeveri, L., Rein, P., and Acharya, S.,  Optimization of Vacuum Pan Design using CFD, American Sugar Association Meeting, Florida, 2003
151. Kumar, S., and Acharya, S., Numerical Simulation of Iridictomy in the Human Eye, ASME Heat Transfer and Fluids Engineering Summer Meeting, Charlotte, N. C., July 2004, ASME-FED-2004-56661
152. Rein, P. W., Echeveri, L. F., and Acharya, S., Flow in  Vacuum Pans-An Experimental and Computational Study, Proceedings of the International Society of Sugar Cane Technology, Guatemala, February  2005, Vol. 25, pp.212-222
153. Kumar, S., Acharya, S., and Beuerman, R., Deposition of Particles on Ocular Tissues, and the Formation of Krukenberg Spindle, Hyphema, and Hypopyon, ASME Intl. Mechanical Engineering Conference and Exposition (IMECE), Anaheim, Nov. 13-19, 2004
154. Uhm, J. H., and Acharya, S., Amplitude-Feedback Control of Combustion Instability with a High-Momentum Jet, ASME Intl. Mechanical Engineering Conference and Exposition (IMECE), Anaheim, Nov. 13-19, 2004
155. Muldoon, F., and Acharya, S., An Improved Immersed Boundary Method for Complex Geometries, ASME Fluids Engineering Summer Conference, Houston, June 19-23 2005
156. Kathawate, J., and Acharya, S., Computational Modeling of Intravitreal Drug Delivery in the Vitreous Chamber with Different Vitreous Substitutes, ASME National Heat Transfer Conference, San Francisco, July 2005
157. Echeveri, L., Acharya, S., and Rein, P.,  Computational and Experimental Study of Two Phase Flows in Crystallizers for Sugar Production, ASME National Heat Transfer Conference, San Francisco, July 2005
158. Park, S. H., and Acharya, S., An Improved Formulation of Turbulence Models for Supersonic Base Flow, 35th AIAA Fluid Dynamics Conference and Exhibit and 17th AIAA Computational Fluid Dynamics Conference, 6-9 June 2005, Toronto, Canada, AIAA paper # 4707
159. Tuncer, O., Acharya, S., and Uhm, J., Hydrogen-Enriched Confined Methane Flame Behavior and Flashback Modeling, 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, January 2006, Paper Number AIAA-2006-754
160. Saha, A. K., Mahmood, G., and Acharya, S., The Role of Leading Edge Contouring on End Wall Flow and Heat Transfer Behavior: Computation and Experiments, ASME- International Gas Turbine Conference, Barcelona, Spain, May 8-11 2006, Paper ASME-GT2006-91318
161. Saha, A. K., and Acharya, S., Computations of Turbulent Flow and Heat Transfer Through a Three-Dimensional Contoured Endwall Passage, ASME- International Gas Turbine Conference, Barcelona, Spain, May 8-11 2006, Paper ASME-GT2006-90390
162. Zhou, F., and Acharya, S., Heat Transfer at High Rotation Numbers in a Two-Pass 4:1AR Rectangular Channel with 45-degree Skewed Ribs, ASME-International Gas Turbine Conference, Barcelona, Spain, May 8-11, 2006, Paper ASME-GT2006-90391
163. Sethuraman, E., Nikitopoulos, D., and Acharya, S., Mass/Heat Transfer in Rotating, Smooth High-Aspect Ratio (4:1) Coolant Channels with Curved Walls, ASME- International Gas Turbine Conference, Barcelona, Spain, May 8-11, 2006, Paper ASME-GT2006-90052
164.  Tuncer, O., Acharya, S., and Uhm, J. H., Effects of Hydrogen Addition on Confined Methane Flame Behavior, ASME Power Conference, Atlanta, Georgia, May 2-4, 2006, Paper PWR2006-88079
165. Katahwate, J., and Acharya, S., Computational Modeling of Drug Delivery in the Vitreous Chamber with Vitreous Substitutes, ASME Summer Bio-Engineering Conference, Amelia Island, Florida, June 21-26, 2006
166. Gilmanov, A., and Acharya, S., Mathematical Modeling of Iris Compliance During Angle-Closure Galucoma, ASME Summer Bio-Engineering Conference, Amelia Island, Florida, June 21-26, 2006
167. Gilmanov, A., and Acharya, S., An Improved Methodology for Modeling Compliance in Biological Systems, 7th World Congress on Computational Mechanics, Los Angeles, California, July 2006
168. Gilmanov, A., and Acharya, S., An Immersed Boundary and Material Point Methodology for Moving/Compliant Surfaces with Heat Transfer, ASME Intl. Mechanical Engineering Conference and Exposition (IMECE), 2006, Chicago, ASME IMECE 2006-15322
169. Acharya, S., and Zhou, F., Heat Transfer in Rectangular Channels (AR=4:1) with Normal Trips at High Rotation Numbers, 13th Intl. Heat Transfer Conference,  Paper No. ECV-23, August 2006, Sydney, Australia
170. Gustafson, R., Mahmood, G., and Acharya, S., Flow and Pressure Measurements in a Linear Turbine Airfoil Passage with 3-Dimensional Endwall Contouring, ASME Gas Turbine Congress & Expo, 2007, Montreal, May 2007, accepted
171. Gustafson, R., Mahmood, G., and Acharya, S., Flow in a Film-Cooled 3D-Contoured Passage, ASME Gas Turbine Congress & Expo, 2007, Montreal, May 2007, accepted
172. Muldoon, F., and Acharya, S., Direct Numerical Simulations of Pulsed Film Cooling, ASME Gas Turbine Congress & Expo, 2007, Montreal, May 2007, accepted
173. Tuncer, O., and Acharya, S., Dynamics, NOx and Flashback Characteristics of a Confined Hydrogen-Enriched Methane Flame, ASME Gas Turbine Congress & Expo, 2007, Montreal, May 2007, accepted
174. Mahmood, G., and Acharya, S., Measured Endwall Flow and Heat Transfer in a Blade Passage with Endwall and Leading Edge Modifications, ASME Gas Turbine Congress & Expo, 2007, Montreal, May 2007, accepted
175. Echeveri, L., Rein, P., and Acharya, S., Measurements and CFD Simulation of Flow in Vacuum Pans, ISSCT (Intl. Society of Sugar Cane Technologists) 2007 Congress, Paper No. FE-15, 2007, July 2007

Presentations with only published abstracts

1. Nikitopoulos, D. E., Acharya, S., and Ning, H., Large-Scale Structure Effects on Particle Motion in a Spatialy Developing Mixing Layer , Bulletin of the American Physical Society, Vol. 41, presented at the 49th Annual Meeting of the American Physical Society, Syracuse University, NY, November 24-26, 1996.
2. Michaelides, E. E., Nikitopoulos, D. E., Seffal, R., and Acharya, S., Structure Effects on Particle Dispersion in an Axisymmetric Jet, Bulletin of the American Physical Society, Vol. 43, p. 2027, presented at the 51st Annual Meeting of the American Physical Society, Philadelphia, PA, November 22-24, 1996.
3. Chakka, P., Mancilla, C., and Acharya, S., “Flame Stability in a trapped Vortex Combustor” APS Meeting, New Orleans, Nov. 1999, Bulletin of the American Physical Society, Vol. 44, No. 8, p. 91
4. Moore, C., Babin, J., Nikitopoulos, D., Acharya, S., Kelly, A., and Gutmark, E., “Dispersion of Droplets by an Electrostatic Spray”, APS Meeting, New Orleans, Nov. 1999, Bulletin of the American Physical Society, Vol. 44, No. 8, p. 26
5. Tyagi, M., and Acharya, S., “On Commutation Errors in Large Eddy Simulations”, APS Meeting, New Orleans, Nov. 1999, Bulletin of the American Physical Society, Vol. 44, No. 8, p. 531
6. Allgood, D., Acharya, S., and Gutmark, E., “Velocity and Thermal Distributions of an Actively Controlled Swirl-Stabilized Spray Flame”, APS Meeting, New Orleans, Nov. 1999, Bulletin of the American Physical Society, Vol. 44, No. 8, p. 68
7. Murugappan, S., Acharya, S., and Gutmark, E., “Closed Loop Control of Combustion Instabilities in a Spray Combustion with Swirl”, APS Meeting, New Orleans, Nov. 1999, Bulletin of the American Physical Society, Vol. 44, No. 8, p. 68
8. Messina, T., and Acharya, S., “Characteristics of a Liquid Spray Issued from Asymmetric and Tabbed Nozzles”, APS Meeting, New Orleans, Nov. 1999, Bulletin of the American Physical Society, Vol. 44, No. 8, p. 110
9. Acharya, S., and Tyagi, M., “Direct Numerical Simulations and Large Eddy Simulations in Heat Transfer-Current State of the Art and Future Perspectives”, Panel Session on DNS/LES, 13th Intl. Heat Transfer Conference, Sydney, Australia, August 2006
10. Acharya, S., and Muldoon, F., “Control of Mixing in Jets-in-Crossflow”, Panel Session on Dynamic Control of Heat Transfer Processes, 13th Intl. Heat Transfer Conference, Sydney, Australia, August 2006
11. Acharya, S., and Gilmanov, A., “Flow-Structure Interactions During Transport of Aqueous Humor in the Eye”, Panel Session on Vizualization and Virtual Reality, 13th Intl. Heat Transfer Conference, Sydney, Australia, August 2006

Invited Symposium/Meeting Proceedings

1. Hibbs, R., Acharya, S., Chen, Y., and Nikitopoulos, D. E., “Heat Transfer in a Two-Pass Internally Ribbed Turbine Blade Coolant Passage with Cylindrical Vortex Generators”, DOE/METC-96/1023, Vol. 2, 1996, pp. 371-390
2. Acharya, S., Myrum, T., Nikitopoulos, D., “Heat Transfer Enhancements in Turbine Blade Coolant Passages”, Proceedings of the DOE-Advanced Turbine Systems Heat Transfer Workshops, 1995 in Hilton Head
3. Acharya, S., Myrum, T., Nikitopoulos, D., “Heat Transfer Enhancements in Turbine Blade Coolant Passages”, Proceedings of the DOE-Advanced Turbine Systems Heat Transfer Workshops, 1997 in Dunes Island
4. Acharya, S., “Space- and Time-Accurate Calculations of Film Cooling Flows”, Proceedings of the NASA-Lewis Coolant Management Workshop, Cleveland, 1996
5. Acharya, S., and Gutmark, E., Swirl-Stabilized Spray Combustion Control, Proceedings of the 10th Navy Propulsion Meeting, Monterrey, CA, 1997, pp. 25-32
6. Acharya, S., and Gutmark, E., Control of Swirl-Stabilized Combustion, Proceedings of the 11th Navy Propulsion Meeting, Tallahassee, FL, 1998, pp. 42-51
7. Acharya, S., Gutmark, E., Murugappan, S., Stepehns, J., and Allgood, D., Characteristics and Control of Combustion in a Swirl-Stabilized Spray Combustor, Proceedings of the 12th Navy Propulsion Meeting, Salt Lake City, Utah, 1999, pp. 1-6
8. Acharya, S., Murugappan, S., Allgood, D., and Gutmark, E., Characteristics and Control of Combustion Instabilities in a Swirl-Stablized Spray Combustor Proceedings of the 13th Navy Propulsion Meeting, Minneapolis, MN, 2000, pp. 3-12
9. Acharya, S., and Allgood, D., Characteristics and Control of Combustion Instabilities in a Swirl-Stablized Spray Combustor Proceedings of the 14th Navy Propulsion Meeting, Chicago, IL, 2001, pp. 1-6
10. Acharya, S., and Uhm, J., Characteristics and Control of Combustion Instabilities in a Swirl-Stablized Spray Combustor Proceedings of the 15th Navy Propulsion Meeting, Washington D. C., 2002, pp. 1-7
11. Uhm, J., and Acharya, S., Combustion Instability Control with a High-Momentum Air-Jet, Proceedings of the 16th Navy Propulsion Meeting, Los Angeles, CA, 2003, pp. 199-207
12. Acharya, S., “Heat Transfer in Internal Coolant Passages with Rotation”, Proceedings of the DOE-UTSR (University Turbine Systems Research) Workshops, Baton Rouge, LA, November 2002
13. Acharya, S., “Heat Transfer in Internal Coolant Passages with Rotation”, Proceedings of the DOE-UTSR (University Turbine Systems Research) Workshops, Clemson, SC, October 2003
14. Acharya, S., “End Wall Heat Transfer with Contouring and Leading Edge Fillet”, Proceedings of the DOE-UTSR (University Turbine Systems Research) Workshops, Clemson, SC, October 2003
15. Uhm, J., and Acharya, S., Combustion Control with a High-Momentum Air-Jet and Nano-Particles, Proceedings of the 17th Navy Propulsion Meeting, Boston, MA, 2004, pp. 33-41
16. Uhm, J., and Acharya, S., Combustion Control with a High-Momentum Air-Jet and Nano-Particles, Proceedings of the 18th Navy Propulsion Meeting, Monterey, CA, 2005, pp. 161-166

     

Other Selected Publications  (Typical contract progress & final reports are not included)

1. Acharya, S., and Sha, W.T., "A Calculation Procedure for Three-Dimensional Flow and Heat Transfer in a Cylinder-Piston Assembly", Argonne National Lab.  Report ANL-85-57, 1985.
2. Acharya, S., and Sha, W.T., "A Calculation Procedure for Flow and Heat Transfer in a Squish Cylinder Piston Assembly", Argonne National Lab. Report ANL-85-58, 1985.
3. Acharya, S., Adair, D., and Whitelaw, J.H., "Flow over an Aerofoil Flap and in its Asymmetric Wake", Mechanical Engineering Report FS/85/26, Imperial College, 1985.
4. Jang, D. S., and Acharya, S., “Two-Dimensional Modeling of Hazardous Waste Combustion in a Kiln”, Korean Industrial Technology Research Institute, Vol. 8, No. 1, June 1993
5. Harvey, A., Acharya, S., and Lawrence, S., "Adaptive Grids for Computations of Three-Dimensional Flows", NASA Tech Briefs, Vol. 15, No. 8, August 1991, pp. 66-67.
6. Harvey, A., Acharya, S., and Lawrence, S., "Adaptive Grids for 3-D Parabolized Navier Stokes Computations", NASA Tech Briefs, Vol. 16, No. 11, November 1992, pp. 95-96.
7. Harvey, A., Acharya, S., and Lawrence, S., “Improved Adaptive Grid Computation of Hypersonic Flow", NASA Tech Briefs, Vol. 21, No. 3, March 1997, pp. 74-75.
8. Acharya, S., “Heat Transfer in a Two-Pass Internally Ribbed Turbine Blade Coolant Channel with Vortex Generators”, DOE/OR-2048, 1997, pp. 427-446
9. Muldoon, F., and Acharya, S., “Dynamics of Large Scale Structures for Jets in Crossflow”, NASA/CR-1998-206606
10. Sharma, C., and Acharya, S., “Direct Numerical Simulation of a Coolant Jet in a Periodic Crossflow”, NASA/CR-1998-208674
11. Acharya, S., “Large Eddy Simulations and Turbulence Modeling for Film Cooling”, NASA/CR-1999-209310

Press Releases/Public Relations (since 2003-no records maintained before 2003)

1. Article in Navigator, NAVO MSRC, Spring 2004, pg. 14-19 on Direct Numerical Simulation of Pulsed Jets in Cross-flow by Frank Muldoon (Ph. D Student)
2. Brief article on Eye Research in the Bioscience section of December 2003 Issue of Research at LSU, published once every three years
3. Eye Research featured in GRIDPRO (commercial grid generation software) web site (http://www.gridpro.com/gridgallery/Eye.html) and in GRIDPRO’s  January 2005 newsletter
4. Stirred tank research with DOW Chemical featured in LSU RESEARCH Spring 2005 Issue
5. Article in LSU Highlights, Spring 2003, Science & Technology Section, Article entitled:  Information Technology
6. Article in LSU Highlights, Spring 2004, Building Community Partnership Section, Article entitled: LSU and State Leaders Partner to Build a Better Louisiana
7. Newspaper Article in The Baton Rouge Morning Advocate on cogeneration research performed by TIER and CPERC, January 19, 2005
8. Article on Biological Computation Research (Aqueous Humor Fluid Dynamics) in the Annual Report (2004) of the LSU Center for Computation and Technology (CCT)
9. Article on our Eye research in the magazine LOUISIANA Research, 2005 Issue
10. Article in LSU Today on the IGERT Grant on Computational Fluid Dynamics, July 2005
11. Article in LSU Research on the IGERT Grant on Computational Fluid Dynamics, Fall/Spring 2005

SELECTED INVITED TALKS/LECTURESHIPS (partial list)

1. Creare Inc., New Hampshire, 1985, Developments in Pressure-Velocity Coupling
2. Duke University, Durham, NC, 1986, Adaptive Grid Methods
3. Indian Institute of Technology, Kharagpur, 1987, Modeling of Two-Phase Reacting Flows
4. Texas A & M University, 1990, Heat Transfer in Ribbed Channels
5. Auburn University, 1995, Solution-Adaptive Methods
6. University of Florida, 1995, Heat Transfer in Rotating Channels
7. Colorado School of Mines, 1995, Enhancements to internal Blade Cooling
8. Brooklyn Polytechnic, 1995, Computations and Measurements in Coolant Channels
9. ASME-National Heat Transfer Conference, 1996, Mass Transfer in Rotating Channels
10. University of Missouri, Columbia, 1997, Gas Turbine Combustion and Blade Cooling
11. Indian Institute of Technology, New Delhi, January 1999, Active Control of Spray Combustion
12. 26th Natl. Conf. On Fluid Mech. and Fluid Power, Kharagpur, India, Plenary Invited Lecture, Dec. 1999, From RANS to DNS
13. General Electric Company, September 1999, Turbine Blade Cooling and Combustion
14. NASA-Lewis AST Propulsion Workshop, September 1999, Film Cooling of Turbine Blades
15. Indian Institute of Technology, Kanpur, January 2000, DNS/LES of Film Cooling
16. Tulane University, Feb. 2000, Characterization and Control of Combustion Instabilities
17. Turbine-2000, Intl. Symposium on Gas Turbine Heat Transfer, Cesme, Turkey, August 2000, Flow and Heat Transfer Predictions of Film Cooling, Keynote
18. Louisiana State University, Mechanical Engineering Department, April 2000, Hot Section Management in Gas Turbines
19. University of Alabama, Tuscaloosa, Aerospace Engineering and Mechanics Department, September 2000, Turbine Blade Cooling Strategies
20. Texas A & M University, College Station, Texas, Mechanical Engineering Department, April 2001, Control of Combustion Processes
21. Iowa State University, Ames, Mechanical Engineering Department, October 2001, Gas Turbine Blade Cooling :Experiments and Computations
22. University of Connecticut, Hartford, Mechanical Engineering Department, November 2001, Advances in Gas Turbine Blade Cooling Computations
23. Indian Institute of Technology Guwahati, Symposium on Heat and Mass Transfer, January 2002, A Perspective on Film Cooling Computations, Keynote
24. State University of New York, Buffalo, March 2002, Combustion Instability and Control
25. University of Tennesse, Knoxville, March 2002, Swirl-Stabilized Spray Combustion-Active Control
26. North Carolina State University, April 2002, Active Control Strategies for Gas Turbine Engines
27. Intl. Symposium on Reacting Flows, Indian Institute of Technology, Madras, Benchmark Data for Combustion with Instabilities, December 2002, Keynote
28. LSU Health Sciences Center, Ocular Fluid Dynamics, April 2003
29. General Electric Global Research Center, Schenectady, Turbine Blade Heat Transfer-Computations, August 2003
30. Pratt & Whitney, East Hartford, Turbine Blade Heat Transfer-Recent Advances, August 2003
31. U. South Carolina, Columbia, SC, Active Control of Flow & Mixing with Modulated Jets, April 2004
32. Gas Turbine Research Establishment, Bangalore, India, Strategies for Improved Performance and Design of Gas Turbine Engines, July 2004
33. Renssalaer Polytechnic Institute, Multi Scale Flow Computations, October 2004
34. University of Texas at Austin, Direct Numerical Simulation of Film Cooling Jets, October 2004
35. IIT Kanpur , Combustion Dynamics and Control, Invited Keynote, National Conference on Air-breathing Engines, November 6, 2004
36. IIT Kanpur, Mechanical Engineering Department, November 5, 2004 DNS of Jets in Cross-flow
37. e-Science Workshop, Seoul Korea, March 15, 2005, DNS and LES: Present Status and Future Directions