SAMPLE
PUBLICATIONS
ACTIVE
CONTROL
Murugappan, S., Gutmark, E., Acharya, S.,
and Krstic, M., “Extremum Seeking Adaptive Controller for
Swirl-Stabilized Spray Combustion”, 28th Symposium (Intl.)
on Combustion, July 2000, Edinburgh, Scotland.
Murugappan, S., Park, S.,
Acharya, S., Annaswamy, A., Ghoneim, A., “Optimal Control
of Swirl-Stabilized Spray Combustion using System-Identification
Approach”, 39th AIAA Aerospace Sciences Meeting and Exhibit,
Reno, January 2001, AIAA 2001, 0779.
X. Chen, G. Gu, P. Martin
and K. Zhou, “Rotating Stall Control Via Bifurcation Stabilization”,
Automatica, vol. 34, no. 4, pp. 437-443, 1998.
PASSIVE
FLOW CONTROL FROM NOZZLES
Messina, T., and Acharya, S., “Characteristric
of a Two-Phase Spray Issued from Asymmetric Nozzles”, 4th
International Conference on Multiphase Flows, May 27–June
1, 2001, New Orleans.
Raman, G. & Taghavi, R.
“Coupling of twin supersonic rectangular jets,” Journal
of Fluid Mechanics, vol. 354, pp. 123-146, 1998.
D. E. Nikitopoulos, J. W.
Bitting, and S. P. Gogineni, “Comparisons Between Circular
And Square Coaxial Jet Flows”, AIAA Paper 2000–661,
38th Aerospace Sciences Meeting and Exhibit, Reno NV, 10–13
January, 2000.
AERODYNAMICS
& FILM COOLING OF TURBINE BLADES
Tyagi, M., and Acharya, S., “Large
Eddy Simulation of a Jet in Crossflow: Freestream Turbulence Effects”,
ASME-FEDSM 99–7799, ASME/JSME Fluids Engineering Meeting,
San Francisco, July 1999.
Pinson, M. W. and Wang, T.,
“Effect of Two-Scale Roughness on Heat Transfer in Transitional
Boundary Layers, Part 1: Surface Heat Transfer and Part 2: Analysis
of Boundary Layer Data”, ASME Journal of Turbomachinery,
vol. 122, pp. 301-307 and pp. 308-316, 2000.
Muldoon, F., and Acharya,
S., “Dynamics of Large Scale Structures for Jets in CrossFlow”,
ASME J. of Turbomachinery, Vol. 121, No. 3, pp. 577–587.
July 1999.
Fujii, K. and Dulikravich,
G.S. (editors): Recent Development of Aerodynamic Design Methodologies
- Inverse Design and Optimization, Vieweg Series on Notes on Numerical
Fluid Mechanics, Vol. 68, Springer, april 1999.
MEMS
Morris, T. E., Murphy, M. C. M., Acharya,
S., “Metal Micro-fuel-injector Fabricated by LIGA”,
SPIE's 2000 Symposium on Micromachining and Microfabrication,
September 18–20, Santa Clara, CA.
Despa, M., Kelly, K., Collier,
J., “Injection Molding of Polymeric LIGA HARMS”, Microsystems
Technology, Vol. 6, 1999, pp. 60–66.
Lee, J. B., English, H., Ahn,
C. H., and Allen, M. G., “Planarization Technique for vertically
Integrated Metallic MEMS on Silicon Foundry Circuits”, Journal
of Micromechanics and Microengineering, Vol. 7, pp. 44–54.
Y. Cheng, B. Y. Shew and C.
H. Lin, and M. K. Chyu, “Concepts for creating Ultra Deep
Trenches using Deep X-ray Lithography,” Sensors and Actuators,
Vol. 82, 2000, pp. 205-209.
INTERNAL
COOLING OF BLADES
S. Acharya, V. Eliades, and D. E. Nikitopoulos,
“Heat Transfer Enhancements in Rotating Two-Pass Coolant
Channels with Profiled Ribs: Average Results”, to appear
in ASME Journal of Turbomachinery, 2001.
Chen, Y., Nikitopoulos, D.,
Hibbs, R., Acharya, S., and Myrum, T., “Detailed Heat/Mass
Transfer Distribution in a Ribbed Coolant Passage”, International
Journal of Heat and Mass Transfer, Vol. 43, No. 8, 2000, pp. 1479–1492.
Ekkad, S. V., Pamula, G.,
and Acharya, S., “Influence of Crossflow Induced Swirl and
Impingement on Heat Transfer in an Internal Coolant Passage of
a Turbine Airfoil”, ASME Journal of Heat Transfer, Vol. 122,
pp. 587–597, August 2000.
MATERIALS
AND MECHANICS OF MATERIALS
W. J. Meng, T. J. Curtis, L. E. Rehn, P.
M. Baldo, “Temperature dependence of inductively coupled
plasma assisted deposition of titanium nitride coatings”,
Surf. Coat. Technol. 120/121, 206 (1999).
W. J. Meng, E. I. Meletis,
L. E. Rehn, P. M. Baldo, “Inductively coupled plasma assisted
deposition and mechanical properties of metal-free and Ti-containing
hydrocarbon coatings”, J. Appl. Phys. 87, 2840 (2000).
N.G. Cormier, B.S. Smallwood,
G.B. Sinclair and G. Meda, “Aggressive submodeling of stress
concentrations,” International Journal for Numerical Methods
in Engineering, Vol 46, pp. 889–909 (1999).
back
to top
