Archival Journal Publications
1. “Specimen Geometry
Effects on the High Strain Rate Testing of Graphite/Epoxy Composites,”
E. Woldesenbet and J.R.Vinson, AIAA Journal, Vol.37, No.9, 1999, 1102-1106.
2. “Fiber Orientation
Effects on High Strain Rate Properties of Graphite/Epoxy Composites,” E.
Woldesenbet and J.R. Vinson, Journal of Composite Materials, Vol.35, No.6,
2001, 509-521.
3. “Effect of Filler
Addition on the Compressive and Impact Properties of Glass Fiber Reinforced
Epoxies,” N. Gupta, B.S. Brar and E. Woldesenbet, Bulletin of
Materials Science, Vol.24, No.2, 2001, 219-223.
4. “Studies on
Compressive Failure Features in Syntactic Foam Material,” N. Gupta,
Kishore, E. Woldesenbet and S. Sankaran, Journal of Materials Science,
Vol.36, 2001, 4485-4491.
5. “Investigation of
Prepreg Bonded Composite Single Lap Joint,” G. Li, S.S. Pang, E.
Woldesenbet, M.A. Stubblefield, P.F. Mensah, S.I. Ibekwe, Composites Part
B: Engineering, Vol. 32B, No. 8, 2001, 651-658.
6. “Response of
Syntactic Foam Core Sandwich Structure Composites to Three-Point
Bending,” N. Gupta, E. Woldesenbet, Kishore, and S. Sankaran,
Journal of Sandwich Structures and Materials, Vol. 4, No. 3, 2002, 249-272.
8. “Compressive
fracture features of syntactic foams – microscopic examination,” N.
Gupta, E. Woldesenbet, Kishroe, and S.
Sankaran, Journal of Materials Science, Vol 37, No
15, 2002, 3199-3209.
9. “Buckling Load
Analysis of Grid Stiffened Composite Cylinders,” S. Kidane, E.
Woldesenbet, G.Li, and J.Helms, Composites Part
B: Engineering, Vol. 34, No. 1, 2003, 1-9.
10. “Optimization For
Buckling Loads of Grid Stiffened Composite Panels,” E. Woldesenbet,
S. Kidane and S.S. Pang, Journal of Composite Structures, Vol. 60, No. 2, 2003,
159-169.
11. “High Strain Rate
Properties of Balanced Angle-Ply Graphite/Epoxy Composites,” A. Jadhav, E.
Woldesenbet and S.S. Pang, Composites Part B: Engineering, Vol. 34, No. 4, 2003,
339-346.
12. “Hygrothermal
studies on syntactic foams and compressive strength determination," N.
Gupta and E. Woldesenbet, Journal of Composite Structures, Vol. 61, No.
4, 2003, 311-320.
13. “Finite Element
Stress Analysis of Composite Sucker Rods,” E. Woldesenbet, ASME
Journal of Energy Resources Technology (JERT), Vol. 125, Issue 4, 2003, 299-303.
14. “Compression
Properties of Syntactic Foams: Effect of Radius and Specimen Aspect
Ratio,” N. Gupta, E. Woldesenbet and P. Mensah, Composites Part A:
Applied Science and Manufacturing, Vol. 35, No. 1, 2004, 103-111.
15. “Microballoon Wall Thickness Effects on
Properties of Syntactic Foams," N. Gupta and E. Woldesenbet, Journal
of Cellular Plastics, Vol. 40, 2004, 461-480.
16. “Effect of Cenosphere Radius Ratio on
Syntactic Foam Core Sandwich Composites,” E. Woldesenbet, N. Gupta
and H.D. Jerro, Journal of Sandwich Structures and Materials, Vol. 7, No. 2, 2005,
95-111.
17. “Characterization
of Flexural Properties of Syntactic Foam Core Sandwich Composites and Effect of
Density Variation,” N. Gupta and E. Woldesenbet, Journal of
Composite Materials, Vol. 39, No. 24, 2005, 2197-2212.
18. “Effects of Density
and Strain Rate on Properties of Syntactic Foams,” E. Woldesenbet, N.
Gupta and A. Jadhav, Journal of Materials Science, Vol. 40, No. 15, 2005,
4009-4017.
19. “Non-Destructive
Characterization of Bond Lines in Composite Adhesive Joints,” P.
Mylavarapu and E. Woldesenbet, Journal of Adhesives Science & Technology,
Vol. 20, No. 7, 2006, 647-660.
20. “Bond thickness effect on impact
response and damage of adhesively bonded graphite/epoxy composites,” Z.
Aga and E. Woldesenbet, Journal of Adhesives Science & Technology, Vol.
21, No. 1, 2007, 21-34.
21. “Surface
preparation effect on performance of adhesively bonded graphite/epoxy
composites subjected to impact,” Z. Aga and E. Woldesenbet, Journal
of Adhesives Science & Technology, Vol. 21, No. 1, 2007, 51-65.
22. “Characterization of Syntactic Foams - An
Ultrasonic Approach," P. Mylavarapu and E. Woldesenbet, Journal
of Cellular Plastics, Vol. 44, No. 3, 2008, 203-222.
23. “Nanoclay Syntactic
Foams - High Strain Rate Properties,” S. Peter and E. Woldesenbet, Mater. Sci. Eng. A, Vol. 494, No. 1-2,
2008, 179-187.
24. “Ultrasonic
Characterization of Sandwich Core Materials," P. Mylavarapu and E.
Woldesenbet, Journal of Sandwich Structures and Materials, Vol. 10,
No. 5, 2008, 413-428.
25. “Low Velocity
Impact Properties of Nanoparticulate Syntactic Foam Composites,” E.
Woldesenbet, Mater. Sci. Eng. A, Vol. 496, No. 1-2, 2008, 217-222.
26. “Radius Ratio Effect on Dynamic Properties of
Syntactic Foam Composites,” E. Woldesenbet and S. Peter, Journal
of Materials Science, Vol. 44, No. 6,
2009, 1551-59.
27. “Volume Fraction Effect on High Strain Rate
Properties of Syntactic Foam Composites,” E. Woldesenbet and
S. Peter, Journal of Materials Science, Vol.
44, No. 6, 2009, 1528-39.
28. “Determination
of Dynamic Modulus of Syntactic and Particulate Foams by a Non-Destructive
Approach,” E. Woldesenbet and P. Mylavarapu, Strain,
Accepted, DOI: 10.1111/j.1475-1305.2008.00513.x, 2008.
29. “Nanoclay and Microballoons Wall Thickness Effect on the Dynamic
Properties of Syntactic Foam,” S. Peter and E. Woldesenbet, ASME Journal of Materials and Technology, Vol.
131, No. 2, 2009, 21007-15.
30. “Flexural
Properties of Nanoclay Syntactic Foam Sandwich Structures," E.
Woldesenbet and N. Sankella, Journal of Sandwich Structures and Materials, Vol.
11, No. 5, 2009, 425-444.
31. “Characterization of Integrated Functionally Gradient
Syntactic Foams,” K. Chittineni and E. Woldesenbet, ASME Journal of Materials and Technology,
In-Press.
32. “A Predictive Model
for Ultrasonic Attenuation Coefficient in Particulate Composites,” P.
Mylavarapu and E. Woldesenbet, Composites
Part B: Engineering, Accepted.
33.
“Effect of Nanoclay on the Impact
Properties of Adhesively Bonded Composites,” P. Mylavarapu and E. Woldesenbet, Journal of
Adhesives Science & Technology, Accepted.
34.
“Response of Nanoclay Syntactic
Foam Sandwich Structured Composites to Low Velocity impact,” E.
Woldesenbet, P. Mylavarapu
and N. Sankella, Journal of Sandwich Structures and
Materials, Submitted.
35. “Self-Healing of
Single Fiber Reinforced Composites," E. Woldesenbet and N. Fikru,
Journal of Composite Materials, Submitted.
36. “Energy Absorption
of Integrated Functionally Gradient Syntactic Foam,” K. Chittineni
and E. Woldesenbet, Journal of Cellular Plastics, Submitted.
37.
“Self-Healing of Fiber Reinforced Composites,"
N. Fikru and E. Woldesenbet, Composite Science
and Technology, Submitted.
38. “Rubberized
Syntactic Foams - High Strain Rate Properties,” P. Wehmer, P.
Mylavarapu and E. Woldesenbet, ASME Journal of Engineering
Materials and Technology, Submitted.
Refereed Conference Publications/Presentations
1. "An Analysis of a Sandwich Composite Structure
for Low Cost and Emergency Composite Housing," E. Woldesenbet and J.R.Vinson, Sandwich Constructions 3, ed. H. G.
Allen, Engineering Materials Advisory Services, Ltd., Southampton, 1996.
2. "Effect of Specimen Geometry in the High
Strain Rate Testing of Graphite/Epoxy Composites," E. Woldesenbet and J.R.Vinson, AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, 38th, Kissimee, Fl, 1997.
3. "High Strain Rate Compression Testing of
K49/3501-6 Kevlar/Epoxy Composites," E. Woldesenbet, E.Preissner
and J.R.Vinson, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and
Materials Conference, 38th, Kissimee, Fl,
1997.
4. "Effect of Fiber Orientation on High Strain
Rate Properties of Kevlar/Epoxy Composites," E. Woldesenbet, E.Preissner
and J.R.Vinson, Proceedings of the 11th International Conference on Composite
Materials, Gold Coast, Australia, July 1997.
5. "Effect of Fiber Orientation on High Strain
Rate Properties of Graphite/Epoxy Composites," E. Woldesenbet and J.R.Vinson, 12th Annual Technical
Conference of the American Society for Composites (ASC) Proceedings, Dearborn,
MI, 1997.
6. "Effect of Moisture on High Strain Rate
Properties of Graphite/Epoxy Composites," E. Woldesenbet and J.R.Vinson, 12th Annual Technical
Conference of the American Society for Composites (ASC) Proceedings, Dearborn,
MI, 1997.
7. "An Examination of the High-Strain-Rate
Compressive Stress-Strain Behavior of Kevlar/Epoxy Composites," E.
Woldesenbet, E.Preissner and J.R.Vinson, presented at the 12th Annual
Technical Conference of the American Society for Composites (ASC), Dearborn,
MI, 1997.
8. "On the Failure of Composite Materials at High
Strain Rates," E. Woldesenbet and J.R.Vinson, 13th Annual Technical Conference of the American
Society for Composites (ASC) Proceedings, Baltimore, MD, pp.1700-1706, 1998.
9. "High Strain Rate Properties of IM7/977-3
Graphite/Epoxy Composites," E. Woldesenbet, J.R.Vinson and J.R.Focht, presented at the 39th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, Long Beach, CA, April
1998.
10. "Prediction of High Strain Rate Properties of
Graphite/Epoxy Composites," E. Woldesenbet, J.R.Vinson, presented
at the 13th U.S. National Congress of Applied Mechanics,
Gainesville, FL, June 1998. (Published Abstract)
11. "High Strain Rate Properties of Composite
Materials," E. Woldesenbet,
Proceedings of the ETCE '99 Conference, ASME's Petroleum Division, Houston, TX,
February 1999.
12. "Integrated LSU/SU Student Project Groups In Composite Materials Courses," E. Woldesenbet and K. C. Schulz, presented at the
1999 ASEE Gulf Southwest Annual Conference, Dallas, TX, ETCE99-6611, March
1999.
13. "Design Enhancement of Couplings of Composite
Sucker Rod Systems," Shivakumar Srinivasamurthy and E. Woldesenbet, 2000 ASME/ETCE-OMAE
Joint Conference, ASME's Petroleum Division, New Orleans, LA, February 2000.
14. "Fatigue Characterization of Composite Sucker
Rods used in the Oil Industry," Vinaykumar Ramchandra and E. Woldesenbet, 2000 ASME/ETCE-OMAE Joint
Conference, ASME's Petroleum Division, New Orleans, LA, February 2000.
15. "High Strain Rate Properties of Composites
after Fatigue Loading," Amit Jain and E.
Woldesenbet, 2000 ASME/ETCE-OMAE Joint Conference, ASME's Petroleum
Division, New Orleans, LA, February 2000.
16. "On Response of Mechanical Properties to Fly
ash addition in Glass Fiber Reinforced Epoxies," E. Woldesenbet and N. Gupta, Microscopy and
Micromechanics of Engineering Materials 2000Proceedings," Melbourne,
Australia, 2000.
17. "Effect of Filler Addition on Mechanical
Properties of Glass Fiber Reinforced Epoxies," N. Gupta, E. Woldesenbet
and B.S. Brar, presented at the meeting of The Minerals, Metals & Materials
Society, St. Louis, MO, October 2000.
18. "Reinforced Syntactic Foam”, N. Gupta
and E. Woldesenbet, poster presentation at International Metallographic
Society, Metallography contest
at TMS Fall Meeting 2000, St. Louis, MO, October 2000.
19. "Deformation and Fracture Characteristics of
Cenoshere Filled Epoxies under Compressive Loading Conditions," N. Gupta
and E. Woldesenbet, 2001 ASME/ETCE-OMAE Joint Conference Proceedings,
ASME's Petroleum Division, Houston, TX, February 2001.
20. "Analysis of Adhesion Bond: Rehabilitation of
Deficient Structures using Composite Plates," E. Woldesenbet and Haftay Hailu, 2001 ASME/ETCE-OMAE
Joint Conference Proceedings, ASME's Petroleum Division, Houston, TX, February
2001.
21. "Stress Intensity Factor Approach for
Estimation of Fracture Behavior of Cenospheres Filled Polymers," N. Gupta
and E. Woldesenbet, presented at the meeting of The Minerals, Metals
& Materials Society, New Orleans, LA, February 2001.
22. "Experimental Studies on Three Point Bending
of Syntactic Foam Core Sandwich Structure Composites," N. Gupta and E.
Woldesenbet, presented at the meeting of The Minerals, Metals &
Materials Society, Indianapolis, IN, November 2001.
23. "Joining Composite Pipes Using Hybrid
Heat-Activated Coupling and Adhesive Bonding," Guoqiang Li, Su-Seng Pang, Eyassu
Woldesenbet, Jack E. Helms,
Randy J. Jones, 2001 ASME/ETCE-OMAE Joint Conference Proceedings, ASME's
Petroleum Division, Houston, TX, February 2001.
24. "Stress Concentration Factor Approach to
Analyze the Deformation and Fracture Behavior of Particulate Composites," E.
Woldesenbet and N. Gupta,
16th Annual Technical Conference of the American Society for Composites
Proceedings, Blacksburg, VA, September 2001.
25. "Analysis of Stress and Load Transfer in a
Single Lap Adhesion Bond between Composite Plates and Concrete, " E. Woldesenbet and H. Haftay, 16th Annual Technical Conference of the American
Society for Composites Proceedings, Blacksburg, VA, September 2001.
26. "Enhancement of Composite Sucker Rods for Use
in the Oil Industry," E. Woldesenbet, 2002 ASME/ETCE-OMAE Joint
Conference Proceedings, ASME's Petroleum Division, Houston, TX, February 2002.
27. "Preliminary Analysis of Grid-Stiffened
Composite Cylinders," Samuel Kidane, Eyassu
Woldesenbet, Guoqiang Li, Jack E. Helms, and Brett H. Smith, 2002
ASME/ETCE-OMAE Joint Conference Proceedings, ASME's Petroleum Division,
Houston, TX, February 2002.
28. "Finite Element Analysis of
Composite-Concrete Adhesion," E. Woldesenbet and Haftay Hailu, 2002 ASME/ETCE-OMAE
Joint Conference Proceedings, ASME's Petroleum Division, Houston, TX, February
2002.
29. "Microscopic Studies of Syntactic Foams
Tested under Three-Point Bending Conditions," E. Woldesenbet and Nikhil Gupta, 2002 ASME/ETCE-OMAE
Joint Conference Proceedings, ASME's Petroleum Division, Houston, TX, February
2002.
30. "New Micromechanics Formulations for the Elastic
Moduli of Granular Assemblies," Linbing Wang and E. Woldesenbet, 2002 ASME/ETCE-OMAE Joint Conference
Proceedings, ASME's Petroleum Division, Houston, TX, February 2002.
31. “Hygrothermal Studies on Syntactic
Foams," N. Gupta and E. Woldesenbet, presented at the ASME IMECE
2002, New Orleans, LA, September 2002.
32. "FEM Contact Analysis and Experimental
Investigation of the Effect of Radius Ratio of Cenospheres on Syntactic
Foams," N. Gupta and E. Woldesenbet, 10th Japan-US Composites
Conference, Stanford, CA, September 2002.
33. "Buckling Analysis of Grid Stiffened
Composite Cylinders," E. Woldesenbet and S. Kidane, 10th Japan-US Composites Conference, Stanford, CA,
September 2002.
34. "Effect of Radius Ratio Parameter of Cenospheres on the Compressive Properties of the
Syntactic Foams," N. Gupta and E. Woldesenbet, 17th Annual
Technical Conference of the American Society for Composites, Lafayette, IN,
September 2002.
35. "Off-Axis Dynamic Properties of Balanced
Angle-Ply Composites," E. Woldesenbet and A. Jadhav, 17th Annual Technical Conference of the American
Society for Composites, Lafayette, IN, September 2002.
36. "Unit Cell approach to a grid stiffened
composite cylinder buckling problem," E. Woldesenbet and S. Kidane, 17th Annual Technical
Conference of the American Society for Composites, Lafayette, IN, September
2002.
37. “Determining the Effect of Wall Thickness of
Cenospheres on Shear Properties of Syntactic Foam Core Sandwich
Composites,” N. Gupta and E. Woldesenbet, 34th International SAMPE
Technical Conference, Baltimore, MD, November 2002.
38. “High strain rate compressive properties of
syntactic foams,” E. Woldesenbet, A. Jadhav and N. Gupta,
18th American Society for Composites Annual Conference, Gainesville,
FL October 2003.
39. “Designing an Introductory Composites
Course,” N. Gupta, E. Woldesenbet, S. Mittal and J. Wandersee, 18th American Society for Composites
Annual Conference, Gainesville, FL October 2003.
40. “Effect of nano-size clay particles on the
flexural properties of syntactic foams,” Gupta, N., E. Woldesenbet, Li, G., Jerro, H. D., and Pang
S-S. Society for Plastics Engineers
ANTEC 2004, Chicago, IL, Paper #777.
41. “Ultrasonic
Characterization of Bond Line Parameters in Adhesively Bonded Carbon-Epoxy
Composites,” Mylavarapu,
P., E. Woldesenbet, Gupta, N., Davis A. and Guoqiang Li.
American Society for Composites 19th Annual Technical Conference
– 2004, Oct 17-20, 2004, Atlanta, GA.
42. “Hygrothermal
testing and evaluation of mechanical properties of rubber-glass particulate
hybrid composites,” Maharsia, R., Gupta, N., E.
Woldesenbet and Jerro, H. D. American
Society for Composites 19th Annual Technical Conference –
2004, Oct 17-20, 2004, Atlanta, GA.
43. “Ultrasonic
signal attenuation in syntactic foams filled with rubber particles,” Mylavarapu, P., E. Woldesenbet, Li,
G., Gupta, N., and Maharsia, R. ASME–2004
Mechanical Engineering Congress and Exposition, Nov 14-19, 2004, Anaheim, CA.
44. “Enhancement of High Strain Rate Damage
Tolerance of Syntactic Foams by Rubber Particle Fillers,” N. Gupta and E.
Woldesenbet, 1st Syntactic and Composites Foams Conference,
Banff, Alberta, August 2004.
45. “Effect of Density and Volume Fraction of
Microballoons on Ultrasonic Attenuation Behavior of Syntactic Foams,” Mylavarapu, P. and E. Woldesenbet. American Society for
Composites 20th Annual Technical Conference – 2005, Sept. 7-9,
2005, Philadelphia, PA.
46. “Polymer Nano-Composite Micromachining by X-ray
Lithography for MEMS Application,” Jin, Y; Dawan,
F; Ibekwe, S G; Jost, G L; E.
Woldesenbet. ASEE-GSW 2006 Conference,
March 16-17, 2006, Baton Rouge, LA.
47. “Non Destructive Characterization of Metal Matrix and Advanced Composites—A Review,” Mylavarapu, P. and E. Woldesenbet. TMS (The Minerals, Metals & Materials Society), March 17-20, 2006, Austin, TX.
48. “Energy Absorption of Functionally Gradient
Syntactic Foams Due To Impact Loading,”
Davis, A., Mylavarapu, P. and E.
Woldesenbet. American Society for Composites 21st Annual Technical
Conference – 2006, Sept. 17-20, 2006, Dearborn, MI.
49. “Investigation of Adhesively Bonded
Graphite-Epoxy Composite Plates Subjected to Impact,” Aga, Z.
and E. Woldesenbet. American Society for Composites 21st Annual Technical
Conference – 2006, Sept. 17-20, 2006, Dearborn, MI.
50. “Characterization of Impact Damage on Hollow
Particulate Composites-A Non Destructive Approach,” Mylavarapu,
P. and E. Woldesenbet. American Society for Composites 21st Annual Technical
Conference – 2006, Sept. 17-20, 2006, Dearborn, MI.
51. “Dynamic Modulus of Syntactic Foam And Particulate Composite Core - A Non Destructive
Approach,” E. Woldesenbet and Mylavarapu, P., International Conference on Experimental Mechanics, July
1-6, 2007, Alexandroupolis, Greece.
52. “Self-Healing
of A Single Fiber-Reinforced Polymer Matrix Composite,” E.
Woldesenbet and Williams, R.,
International Conference on Experimental Mechanics, July 1-6, 2007, Alexandroupolis, Greece.
53. “Effect of Radius Ratio on High Strain Rate
Properties of Syntactic Foam Composites,” E. Woldesenbet, Peters,
S. and Mylavarapu, P., 2nd Syntactic and Composites Foams
Conference, Davos, Switzerland, August 2007.
54. “Effect of the Volume Fraction on High
Strain Rate Properties of Syntactic Foam Composites,” E. Woldesenbet,
Peters, S. and Mylavarapu, P., 2nd Syntactic and Composites Foams
Conference, Davos, Switzerland, August 2007.
55. “High Strain Rate Properties of
Nanoparticulate Syntactic Foams,” Peters, S., E. Woldesenbet and
Mylavarapu, P., American Society for Composites 22nd Annual
Technical Conference – 2007, Sept. 16-19, 2007, Seattle, WA.
56. “Low Velocity Impact Properties of
Nanoparticulate Syntactic Foams,” Kondamadugula, S., E.
Woldesenbet and Mylavarapu, P., American Society for Composites 22nd
Annual Technical Conference – 2007, Sept. 16-19, 2007, Seattle, WA.
57. “Impact Properties of Nanoparticulate
Adhesively Bonded Composites,” Kondamadugula, S., Peters, S.
and E. Woldesenbet, American Society for Composites 22nd
Annual Technical Conference – 2007, Sept. 16-19, 2007, Seattle, WA.
58. “Localized
Biomimetic Self-Healing of a Single FRP Composite,”
E. Woldesenbet and Fikru, N., NSF Engineering
Research and Innovation Conference, January 7-10, 2008, Knoxville, TN.
59. “Nanoparticulate
Syntactic Foam Sandwich Structure,” E. Woldesenbet and Sankella, N.
13th US-Japan Conference on Composite
Materials, June 6-7, 2008, Tokyo, Japan.
60. “Nanoparticles
Effect on Impact Behavior of Adhesively Bonded Composites,” E.
Woldesenbet, Mylavarapu, P. and
Demissie, B., 13th
US-Japan Conference on Composite Materials, June 6-7, 2008, Tokyo, Japan.
61. “Nanofoam
Sandwich Structured Composites.” E. Woldesenbet, International Conference on Composites/Nano
Engineering (ICCE - 16), July 20-26, 2008, Kunming, China.
62. “Impact Behavior of Nanoparticulate-Adhesive
Bonded Composites,” E. Woldesenbet, Mylavarapu, P. and Demissie,
B., American Society for Composites 23rd Annual Technical Conference
– 2008, Sept. 9-11, 2008, Memphis, TN.
63. “Characterization of Functionally Gradient
Syntactic Foam,” Chittineni, K. and E.
Woldesenbet, American Society for Composites 23rd Annual
Technical Conference – 2008, Sept. 9-11, 2008, Memphis, TN.
64. “Low Velocity Impact Behavior
Nanoparticulate Syntactic Foam Sandwich
Structured Composites,” E. Woldesenbet and Sankella, N., American Society for Composites 23rd
Annual Technical Conference – 2008, Sept. 9-11, 2008, Memphis, TN.
65. “Properties of Nanoparticulate Syntactic
Foams at High Microballoon Volume Fraction,” Peter, S. and E.
Woldesenbet, American Society for Composites 23rd Annual
Technical Conference – 2008, Sept. 9-11, 2008, Memphis, TN.
66. “Novel Method of Self-Healing of
Composites,” Fikru, N. and E. Woldesenbet, American
Society for Composites 23rd Annual Technical Conference –
2008, Sept. 9-11, 2008, Memphis, TN.
67. “Functionally
Gradient Foams,” Chittineni, K. and E.
Woldesenbet, 17th International Conference on Composite
Materials (ICCM-17), July 27-31, Edinburgh, UK.